Quantum PlatiniX 2 manual Onboard I/O, AGP Interface, Advanced features

Introduction

Onboard LAN (available on PlatiniX 2-L/-AL, PlatiniX 2I-L/-AL)

#"10/100 Mbit/sec Ethernet support

#"10/100M LAN interface built-in on board

4 USB

#"USB 1.1 compliant

#"Supports wake-up from S1 (power on suspend), S3 (STR) (depend on device)

Onboard I/O

#" Winbond W83627 HF-AW I/O chip

#"One floppy port supporting up to two 3.5″ or 5.25″ floppy drives with 360K/720K/1.2M/ 1.44M/2.88M format

#"Two high speed 16550 compatible UART (COM1/COM2/COM3/COM4 selective) with 16 byte send/receive FIFO

#"One parallel port supports SPP/EPP/ECP mode

#"Infrared interface

#"All I/O ports can be enabled/disabled in the BIOS setup

Onboard Audio(available on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL)

#" AC’97 2.1 Specification Compliant #"16bit stereo codec

#"Multiple stereo input mixer

#"Mono and stereo volume control

#"Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard amplifier and MIDI/Joystick Connector

#"Upgradable to 6 channels audio with CNR card

AGP Interface

#"AGP 1.5V Connector supports AGP 2.0 including AGP 4x data transfers

Advanced features

#"PCI 2.2 Specification Compliant

#"Provides Trend ChipAwayVirus On Guard #"Supports Windows 98/2000/ME soft-off #"Supports Wake-on-LAN and Wake-on-Modem #"Supports Keyboard Password Power-on function

#"Supports system monitoring(monitors CPU and system temperatures, system voltages, fan speed)

#"Providing QDI innovations: StepEasy(optional), SpeedEasy, RecoveryEasy, BIOS-ProtectEasy, LogoEasy, ManageEasy, BootEasy

Manual for PlatiniX 2 series