Appendix
QDI StepEasy(optional)
As one of the Legend QDI’s innovations, StepEasy is a powerful and efficient Easy Technol- ogy for PC DIY fans. It provides a friendly interface for you that you can adjust the CPU frequency conveniently and directly. It is so powerful that you can change the CPU frequency just in a few seconds under the operating system and have no need to reset the PC or change the jumpers. In addition, StepEasy can decrease the risk of changing the CPU frequency to minimum. As long as you conform to the steps of tuning the CPU frequency, there is almost no risk to adjust the frequency.
10MHz decrease 
1MHz decrease
button to run at the
select frequency
10MHz increase
1MHz increase
button to run at the default frequency
Installation
You can install the QDI StepEasy by the following two means:
1.Run CD, select the installation of QDI StepEasy, then, act step by step according to the interface prompt.
2.Browse CD and run the setup.exe in the relative directory.
Instructions
Because there exist some risks for the CPU or the motherboard when you change the CPU frequency, please read the following and refer to the figure above carefully before tuning the CPU frequency.
A.18 | Manual for PlatiniX 2 series |