BIOS Description |
| |
|
|
|
#"Suspend Type | Stop Grant | Select the Suspend type. |
| PwrOn Suspend |
|
#"MODEM Use | 3,4,5,7,9, | Special |
IRQ | 10,11 |
|
| NA | This function is not applied. |
#"Suspend Mode | Disabled | The system never enter Suspend mode by timer. |
| 1Min ~ 1Hour | Define the continuous idle time before the system |
|
| enters Suspend mode. If any items defined in |
|
| “PM Events” are on and activated, the system will |
|
| be woken up. |
#"HDD Power | Disabled | HDD’s motor will not be off by timer. |
Down | 1 - 15 Min | Define the continuous HDD idle time before the |
|
| HDD enters power saving mode (motor off). |
#" | The system will immediately power off once the | |
| power button is pressed. | |
| Delay 4 sec | The system will power off when power button is |
|
| pressed for 4 seconds. |
Enabled | Allow the system to be waked up by PCI card. | |
card | Disabled | Do not allow the system to be powered on by |
|
| PCI card. |
Enabled | Allow the system to be powered on when a | |
Ring/LAN |
| Ring indicator signal comes up to UART1 or |
|
| UART2 from external modem (to LAN |
|
| Header from LAN adapter or to modem Ring on |
|
| Header from internal modem card). |
| Disabled | Do not allow Ring/LAN wake up. |
Enabled | The system could be waken up by USB devices | |
S3 by USB |
| from the Suspend to RAM status. |
| Disabled | The system cannot be waken up by USB devices |
|
| from the Suspend To RAM status. |
#"CPU THRM- | 12.5%, 25%, | Select the duty cycle of the STPCLK# signal, |
Throttling | 50%, 37.5%, | slowing down the CPU speed when the system |
| 62.5%, 75%, | enters green mode. |
| 87.5% |
|
#"Resume | Enabled | RTC alarm can be used to generate a |
by Alarm |
| event to power up the system. |
| Disabled | RTC has no alarm function. |
|
|
|
Manual for PlatiniX 2 series