Quantum PlatiniX 2 manual Introduction, Operation Process, Partition Interface see

Appendix

RecoveryEasy

Introduction:

RecoveryEasyTM, the latest QDI innovation, is able to protect the system from being destroyed, by creating a so-called “mirror partition” for a current hard disk partition and backuping all the data to the mirror area. This ideal utility provides disk partition, disk data backup/recovery, CMOS settings backup/recovery and multi-boot functions. RecoveryEasy is also able to prevent the system from being attacked by different kinds of boot virus or other severe virus such as CIH. In case the system is ruined either by mistake or virus, the system can be recovered from the mirror partition. It applies the build-in BIOS technology that does not occupy either the hard disk space or the system memory. It’s the best choice for both corporations and PC users.

Operation Process:

There are two hotkeys – Ctrl+Bksp and F12 for RecoveryEasy to enter “Partition” and “Recovery” user interfaces accordingly during BIOS booting up. If two or more hard disks are installed, use F5 key to choose the hard disk.

1.Partition Interface (see figure-1)

Users can create and delete partitions/mirror partitions, activate partitions, and uninstall RecoveryEasy in Partition User Interface.

figure-1 Partition Interface

1.0Install RecoveryEasy for the first time

a.The utility checks the previous disk partition at first, and displays the status of the first four partitions. If there are more than four disk partitions, users will be asked to delete the redundant disk partitions, since only four partitions that can be activated are allowed to exist. However, if there’re only four or fewer parti- tions, users can follow the system prompt and choose to install RecoveryEasy based on the previous disk partitions. In this way, the original extension parti- tions will be changed to normal ones, and probably the sequence of the parti- tions will be changed also, but the contents contained in each partition will remain the same.

Manual for PlatiniX 2 series