Quantum PlatiniX 2 manual Askir

BIOS Description

#"Onboard/CNR LAN ""Selection

#IDE HDD Block Mode

#KBC input clock

#Power On Function

#KB Power ON Password

#Onboard FDC Controller

#Onboard Serial Port 1/2

#UART Mode Select

#RxD, TxD Active

#IR Transmission Delay

#UR2 Duplex Mode

#Use IR Pins

Auto

Onboard

Ext.CNR

Enabled

Disabled

6/8 MHz 12/16 MHz

Button only Password

Enter

Enabled

Disabled

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3 Auto

Disabled

Normal, IrDA

ASKIR

Hi, Lo/Lo, Hi Lo, Lo/ Hi, Hi

Enabled

Disabled

Half

Full

IR-Rx2Tx2 RxD2, TxD2

If a CNR Interface is enabled, the onboard LAN will be automatically disabled. Otherwise, the onboard LAN is enabled.

The onboard LAN is enabled. CNR Interface is enabled.

Allow IDE HDD to read/write several sectors once.

IDE HDD only reads/writes a sector once.

Set the PS/2 Keyboard input clock as 6/8/12 /16MHz.

Power on by power button.

Power on with keyboard password.

Enter keyboard password.

Onboard floppy disk controller is enabled. Onboard floppy disk controller is disabled.

Define the onboard serial port address and required interrupt number.

Onboard serial port address and IRQ are automatically assigned.

Onboard serial port is disabled.

Set UART mode.

Default is recommended.

Enable IR Transmission delay function. Disable IR Transmission delay function.

Default is recommended.

Default is recommended.

Manual for PlatiniX 2 series