Chapter 2: Installation
2-3 Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure on
!the label area of the fan.
Notes:
1.Always connect the power cord last and always remove it before adding, re- moving or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heatsink.
2.Make sure to install the motherboard into the chassis before you install the CPU heatsink and heatsink fans.
3.When purchasing a motherboard without the 5500 Series processor pre- installed, make sure that the CPU socket plastic cap is in place, and none of the CPU socket pins are bent; otherwise, contact the retailer immediately.
4.Refer to the MB Features Section for more details on CPU support.
Installing an LGA 1366 Processor
1. Press the socket clip to release the load plate, which covers the CPU socket, from its locking position.
Socket Clip Load Plate
2. Gently lift the socket clip to open the load plate.
Plastic Cap
3. Hold the plastic cap at its north and south center edges to re- move it from the CPU socket.
Hold the north & south edges of the plastic cap to remove it