SUPER MICRO Computer X8DTU-6F+-LR manual X8DTU-6F+/X8DTU-6TF+/X8DTU-6TF+-LR LED Indicators

X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR User’s Manual

USB 4/5	Front-panel accessible USB Connections
USB 6	Type A USB Embedded Drive Connector
USB 7	USB Embedded Drive Connector
UID	UID (Unit Identifier) Switch
UIOP	Universal I/O Add-on Card Power Header (See the Warning
	below.)
VGA	VGA Port
	X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR LED Indicators
LED	Description	State	Status
LED 1	Power LED	Green: On	PWR On
LED 2	UID LED	Blue: Solid On (from UID Switch),	Unit Identi-
		Blinking (from IPMI)	fied
LED 3	BMC Heartbeat LED	Green: Blinking	BMC Normal
LED 4	SAS Activity LED	Blinking	SAS Active
LED 5	SAS Heartbeat LED	Blinking	SAS Normal
LED 6	SAS Error LED	On	SAS Errors
			Occurred
		10Gb Link: Green On
LED7	10Gb LAN Dual-port	10Gb Active: Green Blinks
	LED (Up: TLAN1,	1Gb Link: Yellow On
	Bottom: TLAN2)

1Gb Active: Yellow Blinks

Warnings!

•

•

To avoid damaging the power supply or motherboard, please use a power sup- ply that contains a 24-pin and two 8-pin power connectors. Be sure to connect these connectors to the 24-pin (JPW1) and the two 8-pin (JPW2,JPW3) power connectors on the motherboard. Failure to do so will void the manufacturer warranty on your power supply and motherboard.

To provide adequate power to the add-on cards installed on the motherboard, please connect the UIOP PWR connector to the power supply for these cards to work properly.

2-6