SUPER MICRO Computer X8SIL user manual Installing and Removing DIMMs, To Remove

X8SIL/X8SIL-F User's Manual

Installing and Removing DIMMs

1	Position the DIMM
	module's bottom key
	so it aligns with the

receptive point on the slot.

2	Push the Lock/Release
	tabs to their Release po-
	sitions. Make sure that

the DIMM module's side notches align with the slot's Lock/ Release tabs as it is pressed in.

Notches

Release

Release Lock/Release Tabs

3

Insert the DIMM mod- ule vertically and press down until the module snaps into place.

	When the module is
4
	properlly inserted, the
	Lock/Release tabs will
	automatically secure

the DIMM module, locking it into place.

Lock

Press Down

Release

	To Remove:
5
	Use your thumbs to
	gently push the Lock/
	Release tabs near both

ends of the module. This should release it from the slot. Pull the DIMM module upwards.

Lock

Release

2-12