SUPER MICRO Computer X8SIL Super IO Device Configuration, Remote Access Configuration

Page 81

Chapter 4: AMI BIOS

Initiate Graphic Adapter

Use the feature to select the graphics controller to be used as the primary boot device. The options are Other and Onboard VGA.

Super IO Device Configuration

Serial Port1 Address/ Serial Port2 Address

This option specifies the base I/O port address and the Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for Serial Port1 are Disabled, 3F8/IRQ4, 2E8/IRQ3. The options for Serial Port2 are Disabled, 2F8/IRQ3, and 2E8/IRQ3.

Onboard Floppy Controller

Select Enabled to enable the onboard Floppy Controller. The options are Enabled and Disabled.

Remote Access Configuration

Remote Access

This allows the user to enable the Remote Access feature. The options are Dis- abled and Enabled.

If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console Redirection. The options are COM 1, COM 2 and COM 3.

Note: Serial Over LAN (SOL) is enabled on COM 3 on the X8SIL-F.

Serial Port Mode

This feature allows the user to set the serial port mode for Console Redirection. The options are 115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.

Flow Control

This feature allows the user to set the flow control for Console Redirection. The options are None, Hardware, and Software.

4-13

Image 81
Contents X8SIL X8SIL-F Page Conventions Used in the Manual About This Motherboard Manual OrganizationHeadquarters Contacting SupermicroEurope Asia-PacificTable of Contents Vii Main Setup Advanced Setup Configurations How To Change the Configuration DataInstalling Drivers Configuring Supero Doctor IntroductionTable of Contents Overview ChecklistMotherboard X8SIL-F Image Important Notes to the User 11,12 13,14X8SIL/X8SIL-F LED Indicators Number X8SIL/X8SIL-F Headers/Connectors Number Description33,32,27,23,7 Description Color/State StatusMotherboard Features Devices USB Devices X8SIL-F Power ConfigurationKeyboard/Mouse Serial COM PortsDimensions CD UtilitiesOther X8SIL / X8SIL-F System Block Diagram Block Diagram RoHS 6/6Chipset Overview Intel 3400/3420 Chipset FeaturesPC Health Monitoring Power Configuration SettingsSlow Blinking LED for Suspend-State Indicator Power SupplyBios Support for USB Keyboard Main Switch Override MechanismSuper I/O X8SIL/X8SIL-F User’s Manual Precautions Static-Sensitive DevicesUnpacking Installing the LGA1156 Processor Processor and Heatsink InstallationPage Page Installing a Passive CPU Heatsink Removing the Heatsink Installing an Active Fan CPU Heatsink Page Active Heatsink Removal Installing DDR3 Memory Dimm InstallationMemory Support Memory Population Guidelines DDR3 ECC Registered Rdimm Memory SupportPopulated Any combination Per Channel To Remove Installing and Removing DIMMsPossible System Memory Allocation & Availability Motherboard Installation Tools NeededLocation of Mounting Holes Installation Instructions Back Panel Connectors and IO Ports Connectors/IO PortsMouse KeyboardMouse Green USBPN3 USBPP3 Universal Serial Bus USBLAN Ports Pin Definition Ethernet PortsCOM1 COM2 Serial PortsVGA Video ConnectorFront Control Panel JF1 Header PinsFront Control Panel Pin Definitions Power LEDOH/Fan Fail Overheat OH/Fan FailReset Button Power ButtonReset Button PWR Button ATX Main PWR & CPU PWR Connectors Connecting CablesRequired Pin ATX Main PWR Pin Processor PWRChassis Intrusion Fan HeadersInternal Buzzer SpeakerInternal Buzzer Speaker Header Power Supply I2C Connector Onboard Power LEDSgpio 0/1 Headers Alarm ResetLAN Port Enable/Disable Jumper SettingsLAN Port 1 Enable B. LAN Port 2 Enable Explanation of JumpersPCI Slot SMB Enable Cmos ClearClear Cmos JI2C1 JI2C2 VGA Enable VGA EnableBMC Jumper USB Wake-UpBP USB 0/1 Wake-up BMC JumperLAN 1/LAN 2 LEDs Onboard IndicatorsIpmi Dedicated LAN LEDs LAN PortOnboard PWR LED B. Ipmi Heartbeat LED Ipmi Heartbeat LEDSata Connections Sata and Floppy Drive ConnectionsFloppy Floppy ConnectorBefore Power On Troubleshooting ProceduresNo Power No VideoTechnical Support Procedures Memory ErrorsLosing the System’s Setup Configuration Frequently Asked Questions Question How do I update my BIOS?Question What type of memory does my motherboard support? Question Whats on the CD that came with my motherboard? Page Battery Removal and Installation Battery RemovalBattery Installation Returning Merchandise for Service Page Starting Bios Setup Utility How To Change the Configuration DataIntroduction How to Start the Setup Utility Main SetupSystem Time/System Date ProcessorSystem Memory BOOT Feature Advanced Setup ConfigurationsProcessor & Clock Options Hardware Prefetcher Available when supported by the CPU Active Processor CoresIntel Eist Technology C1E Support State package limit settingIntel C-STATE Tech C1 Auto DemotionActive State Power Management Memory Remap FeatureAdvanced Chipset Control Intel VT-dSATA / Floppy Configuration PIO Mode LBA/Large ModeType Block Multi-Sector TransferA.R.T. For Hard disk drives DMA ModePCI/PnP Configuration Remote Access Configuration Super IO Device ConfigurationHardware Health Configuration CPU Temperature System TemperatureFan1 ~ Fan 6 Reading Fan Speed Control ModesIPMI Configuration X8SIL-F Only ACPI ConfigurationIpmi Firmware Revision Set LAN ConfigurationStatus of BMC View BMC System Event LogIntel TXT LT Configuration Event Log ConfigurationSupervisor Password Security SettingsUser Password Change Supervisor PasswordBoot Settings Boot Device PriorityBoot Sector Virus Protection Exit Options Retry Boot DevicesRemovable Drives CD/DVD DrivesLoad Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard ChangesX8SIL/X8SIL-F Recoverable Post Error Beep Codes Appendix a Post Error Beep CodesPage Driver/Tool Installation Display Screen Installing DriversConfiguring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control Page Part 1 Boot Sector Recovery Process Recovery Process from a USB Device/Drive Recommended MethodPart 2 Bios Reprogramming Re-Flashing Recovery Process from an IDE/SATA Atapi Disc Drive
Related manuals
Manual 102 pages 50.95 Kb

X8SIL specifications

SUPER MICRO Computer X8SIL, X8SIL-F, and X8SIL-V are advanced server motherboards designed to meet the demanding needs of today's data centers and enterprise environments. These motherboards from Supermicro deliver exceptional performance, scalability, and reliability, making them suitable for a wide range of applications, including virtualization, cloud computing, and database management.

One of the main features of the X8SIL series is its compatibility with Intel's Xeon 5500 and 5600 series processors. This allows users to harness the power of multi-core technology, ensuring optimal performance for both single-threaded and multi-threaded applications. With support for up to 144GB of DDR3 ECC memory, the X8SIL motherboards provide ample memory bandwidth, enhancing the overall system performance and efficiency.

The X8SIL-F variant includes an integrated IPMI (Intelligent Platform Management Interface) feature, which enables remote management and monitoring of the system. This technology allows IT administrators to proactively manage server health, perform remote troubleshooting, and ensure minimal downtime. Additionally, the X8SIL-F supports Supermicro's Green Computing technology, which helps reduce power consumption and enhance energy efficiency, leading to lower operational costs.

In terms of storage, the X8SIL series offers multiple SATA and SAS interface options, facilitating a wide range of storage configurations. The motherboards feature six SATA II ports and optional SAS capabilities, allowing users to implement RAID setups for improved performance and data redundancy. This flexibility in storage solutions is crucial for environments that require high availability and reliability.

The X8SIL motherboard series is equipped with a range of I/O ports, including multiple USB ports, PCI Express slots, and Gigabit Ethernet interfaces. This extensive connectivity ensures that users can easily expand and customize their systems according to specific application needs. The onboard Gigabit Ethernet ports provide fast network access, which is essential for data-intensive workloads.

Furthermore, the X8SIL, X8SIL-F, and X8SIL-V boast an efficient thermal design. These motherboards feature robust heat sinks and fan headers, which help maintain optimal operating temperatures, even under heavy workloads. This thermal efficiency is critical in extending the lifespan of components and ensuring consistent performance.

In summary, SUPER MICRO Computer's X8SIL, X8SIL-F, and X8SIL-V motherboards stand out with their strong performance, advanced management features, flexible storage options, and efficient thermal design. These characteristics make them ideal choices for businesses looking to build reliable and scalable data center solutions.