SUPER MICRO Computer X8SIL Frequently Asked Questions, Question How do I update my BIOS?

Page 63

Chapter 3: Troubleshooting

2.BIOS upgrades can be downloaded from our website at (http://www.supermicro. com/support/bios/).

Note: Not all BIOS can be flashed. Some cannot be flashed; it depends on the modifications to the boot block code.

3.If you've followed the instructions above to troubleshoot your system, and still cannot resolve the problem, then contact Supermicro's technical support and provide them with the following information:

Motherboard model and PCB revision number

BIOS release date/version (this can be seen on the initial display when your system first boots up)

•System configuration

An example of a Technical Support form is on our website at (http://www.

supermicro.com/support/contact.cfm).

4.Distributors: For immediate assistance, please have your account number ready when placing a call to our technical support department. We can be reached by e-mail at support@supermicro.com, by phone at: (408) 503-8000, option 2, or by fax at (408)503-8019.

3-3 Frequently Asked Questions

Question: What type of memory does my motherboard support?

Answer: The X8SIL/X8SIL-F supports up to 32GB of Registered ECC DDR3 or up to 16GB of unbuffered ECC DDR3 SDRAM (1.5V, 1333/1066/800 MHz). See Section 2-3 for details on installing memory.

Question: Does the X8SIL/-F, X8SIE/-F/LN4 or X8SI6-F motherboard support non-ECC UDIMM with the Xeon 34xx CPU?

Answer: No, they don't. With Xeon 34xx CPUs, memory type has to be either ECC UDIMM or ECC RDIMM. Please refer to our “tested memory list” in our motherboard website. For memory usage guidelines, please check Chapter 2 of this manual.

Question: How do I update my BIOS?

Answer: It is recommended that you do not upgrade your BIOS if you are not experiencing any problems with your system. Updated BIOS files are located on our web site at http://www.supermicro.com/support/bios/. Please check our BIOS warning message and the information on how to update your BIOS on our

3-3

Image 63
Contents X8SIL X8SIL-F Page Conventions Used in the Manual About This Motherboard Manual OrganizationAsia-Pacific Contacting SupermicroHeadquarters EuropeTable of Contents Vii Introduction How To Change the Configuration DataMain Setup Advanced Setup Configurations Installing Drivers Configuring Supero DoctorTable of Contents Overview ChecklistMotherboard X8SIL-F Image Important Notes to the User 11,12 13,14Description Color/State Status X8SIL/X8SIL-F Headers/Connectors Number DescriptionX8SIL/X8SIL-F LED Indicators Number 33,32,27,23,7Motherboard Features Serial COM Ports Power ConfigurationDevices USB Devices X8SIL-F Keyboard/MouseDimensions CD UtilitiesOther X8SIL / X8SIL-F System Block Diagram Block Diagram RoHS 6/6Chipset Overview Intel 3400/3420 Chipset FeaturesPC Health Monitoring Power Configuration SettingsMain Switch Override Mechanism Power SupplySlow Blinking LED for Suspend-State Indicator Bios Support for USB KeyboardSuper I/O X8SIL/X8SIL-F User’s Manual Precautions Static-Sensitive DevicesUnpacking Installing the LGA1156 Processor Processor and Heatsink InstallationPage Page Installing a Passive CPU Heatsink Removing the Heatsink Installing an Active Fan CPU Heatsink Page Active Heatsink Removal Installing DDR3 Memory Dimm InstallationMemory Support Memory Population Guidelines DDR3 ECC Registered Rdimm Memory SupportPopulated Any combination Per Channel To Remove Installing and Removing DIMMsPossible System Memory Allocation & Availability Motherboard Installation Tools NeededLocation of Mounting Holes Installation Instructions Back Panel Connectors and IO Ports Connectors/IO PortsMouse KeyboardMouse Green USBPN3 USBPP3 Universal Serial Bus USBLAN Ports Pin Definition Ethernet PortsCOM1 COM2 Serial PortsVGA Video ConnectorFront Control Panel JF1 Header PinsFront Control Panel Pin Definitions Power LEDOH/Fan Fail Overheat OH/Fan FailReset Button Power ButtonReset Button PWR Button Pin Processor PWR Connecting CablesATX Main PWR & CPU PWR Connectors Required Pin ATX Main PWRChassis Intrusion Fan HeadersInternal Buzzer SpeakerInternal Buzzer Speaker Header Power Supply I2C Connector Onboard Power LEDSgpio 0/1 Headers Alarm ResetExplanation of Jumpers Jumper SettingsLAN Port Enable/Disable LAN Port 1 Enable B. LAN Port 2 EnablePCI Slot SMB Enable Cmos ClearClear Cmos JI2C1 JI2C2 VGA Enable VGA EnableBMC Jumper USB Wake-UpBMC Jumper BP USB 0/1 Wake-upLAN Port Onboard IndicatorsLAN 1/LAN 2 LEDs Ipmi Dedicated LAN LEDsOnboard PWR LED B. Ipmi Heartbeat LED Ipmi Heartbeat LEDSata Connections Sata and Floppy Drive Connections Floppy Floppy ConnectorNo Video Troubleshooting ProceduresBefore Power On No PowerTechnical Support Procedures Memory ErrorsLosing the System’s Setup Configuration Frequently Asked Questions Question How do I update my BIOS?Question What type of memory does my motherboard support? Question Whats on the CD that came with my motherboard? Page Battery Removal and Installation Battery RemovalBattery Installation Returning Merchandise for Service Page Starting Bios Setup Utility How To Change the Configuration DataIntroduction How to Start the Setup Utility Main SetupSystem Time/System Date ProcessorSystem Memory BOOT Feature Advanced Setup ConfigurationsProcessor & Clock Options Hardware Prefetcher Available when supported by the CPU Active Processor CoresIntel Eist Technology C1 Auto Demotion State package limit settingC1E Support Intel C-STATE TechIntel VT-d Memory Remap FeatureActive State Power Management Advanced Chipset ControlSATA / Floppy Configuration Block Multi-Sector Transfer LBA/Large ModePIO Mode TypeA.R.T. For Hard disk drives DMA ModePCI/PnP Configuration Remote Access Configuration Super IO Device ConfigurationHardware Health Configuration CPU Temperature System TemperatureFan1 ~ Fan 6 Reading Fan Speed Control ModesIPMI Configuration X8SIL-F Only ACPI ConfigurationView BMC System Event Log Set LAN ConfigurationIpmi Firmware Revision Status of BMCIntel TXT LT Configuration Event Log ConfigurationChange Supervisor Password Security SettingsSupervisor Password User PasswordBoot Settings Boot Device PriorityBoot Sector Virus Protection CD/DVD Drives Retry Boot DevicesExit Options Removable DrivesDiscard Changes Load Optimal DefaultsLoad Fail-Safe Defaults Discard Changes and ExitX8SIL/X8SIL-F Recoverable Post Error Beep Codes Appendix a Post Error Beep CodesPage Driver/Tool Installation Display Screen Installing DriversConfiguring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control Page Part 1 Boot Sector Recovery Process Recovery Process from a USB Device/Drive Recommended MethodPart 2 Bios Reprogramming Re-Flashing Recovery Process from an IDE/SATA Atapi Disc Drive
Related manuals
Manual 102 pages 50.95 Kb