SUPER MICRO Computer X7SBL-LN1/LN2 user manual Appendix B Installing the Windows OS

Page 89

Appendix B: BIOS POST Codes

Appendix B

Installing the Windows OS

After all hardware components have been installed, you must ﬁ rst conﬁ gure Intel South Bridge RAID Settings before you install the Windows OS and other software drivers. To conﬁ gure RAID settings, please refer to RAID Conﬁ guration User Guides posted on our website at www.supermicro.com/support/manuals.

B-1 Installing the Windows XP/2000/2003 OS for Systems with RAID Functions

1.Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.

2.Press the <F6> key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays.

3.When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s).

4.Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH9R" into Drive A: and press the <Enter> key.

5.Choose the Intel(R) ICH9R SATA RAID Controller from the list indicated in the XP/2000/2003 Setup Screen, and press the <Enter> key.

6.Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are speciﬁ ed, press the <Enter> key to continue with the installation.

7.From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The XP/2000/2003 Setup will automatically load all device ﬁ les and then, continue the Windows XP/2000/2003 installation.

8.After the Windows XP/2000/2003 OS Installation is completed, the system will automatically reboot.

B-1

Image 89

Contents X7SBL-LN1/LN2 Manual Revision 1.0c Release Date February 6 Conventions Used in the Manual About This ManualManual Organization Table of Contents Troubleshooting Bios Overview ChecklistAsia-Paciﬁ c HeadquartersEurope X7SBL-LN1/LN2 Image Important Notes to the User Motherboard LayoutJPUSB1/JPUSB2 X7SBL-LN1/LN2 Quick ReferenceMotherboard Features Temperature Acpi FeaturesDimensions Onboard I/OIntel 3200 Chipset System Block Diagram Block DiagramMemory Controller Hub MCH Intel ICH9R System FeaturesChipset Overview Environmental Temperature Control Special FeaturesRecovery from AC Power Loss PC Health MonitoringVirtualization Technology Acpi FeaturesCPU Overheat LED and Control System Resource AlertSuper I/O Slow Blinking LED for Suspend-State IndicatorPrecautions Motherboard InstallationStatic-Sensitive Devices UnpackingInstallation Overview Processor and Heatsink InstallationTriangle Installation of the LGA 775 ProcessorPage Installation of the Heatsink Removal of the Heatsink Memory Support Installing DIMMsDimm Installation Top View of DDR2 Installing and Removing DIMMsBack Panel Connectors/IO Ports Control Panel Connectors/IO PortsBack Panel Connectors Back Panel I/O Port Locations and Deﬁ nitionsFront Control Panel Header PinsFront Control Panel Pin Deﬁ nitions NMI Button Power LEDHDD LED NIC1/NIC2 LED IndicatorsOverheat/Fan Fail LED OH Power Fail LEDPower Button Reset ButtonProcessor Power Connector Connecting CablesATX Power Connector Chassis Intrusion Universal Serial Bus USBSerial Ports ATX PS/2 Keyboard and PS/2 Mouse PortsPWR LED External Speaker/Internal BuzzerGlan Giga-bit Ethernet Ports VGA ConnectorFan Headers Wake-On-LAN Wake-On-RingPower SMB Connector Power Fault PWR Supply FailureExplanation of Jumpers Jumper SettingsGlan Enable/Disable Clear Cmos Watch Dog Enable/DisablePCI/PCI-E Slots to SMB Speeds VGA Enable/DisableForce-Power-On Enable/Disable USB Wake-Up Glan LEDs Onboard IndicatorsOnboard Power LED LE1 9Floppy and SIM 1U Ipmi Connections Floppy ConnectorSIM 1U Ipmi X7SBL-LN1/LN2 User’s Manual No Power Troubleshooting ProceduresBefore Power On No Video Memory ErrorsLosing the System’s Setup Conﬁ guration Technical Support Procedures Question What type of memory does my motherboard support? Frequently Asked QuestionsReturning Merchandise for Service X7SBL-LN1/LN2 User’s Manual How To Change the Conﬁ guration Data System BiosStarting the Setup Utility IntroductionMain Bios Setup Running SetupSystem Time Main Bios Setup Menu ΥMain Setup FeaturesSystem Date Legacy Diskette aBios Revision Bios DateHard Disk Pre-Delay Native Mode OperationType Sata Ahci Legacy EnableΥIDE Channel 0 Master/Slave/SATA Port2/SATA Port3 CHS Format LBA Mode ControlLBA Format Multi-Sector TransfersUltra DMA Mode Transfer ModeInstalled Memory Bit I/OΥBoot Features Advanced SetupQuiet Boot QuickBoot ModeAcpi Mode Post ErrorsPower Button Behavior Resume On Modem RingΥAdvanced Processor Options Power Loss ControlWatch Dog Summary ScreenHyperthreading Available when supported by the CPU C1 Enhanced Mode Available when supported by the CPU Intel Virtualization Technology Available when supported bySet Maximum Ext. CPUID=3 Echo TPRCPU and the OS Clock Spectrum FeatureΥAdvanced Chipset Control High Precision Event Timer Enable VT-DMemory Remapping Route Port 80h Cycles toCache Video Bios Area Cache System Bios AreaΥMemory Cache Cache Base 0-512KΥPCI32 Slot#1 PCI32 Slot#2 ΥPNP Conﬁ gurationΥSlot 4 PCI-Exp ΥSlot 3 PCI-ExpΥI/O Device Conﬁ guration ΥOnboard LAN 1 and Onboard LANSerial Port a KBC Clock InputBase I/O Address InterruptΥDMI Event Logging ΥHardware Monitoring ΥConsole RedirectionCPU Overheat Alarm CPU Temperature Fan Speed Control Modes System TemperatureFan1 Fan Voltage Monitoring Security SettingsUser Password Is Supervisor Password IsSet Supervisor Password Set User PasswordBoot Priority Order/Excluded from Boot Orders Boot SettingsExit Load Setup DefaultsExit Saving Changes Exit Discarding ChangesSave Changes Discard ChangesPage Recoverable Post Error Beep Codes Appendix a Bios Error Beep CodesPage Appendix B Installing the Windows OS Page Appendix C Installing Other Software Programs and Drivers Conﬁ guring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control Page Disclaimer