SUPER MICRO Computer X7DGU Vlan Tagging, IP Address Source, IP Subnet Mask, Default Gateway

Page 78

X7DBU/X7DGU User's Manual

VLAN Tagging

Select Enabled to enable Virtual LAN(s) for IPMI connections and allow the user to conﬁgure VLAN settings. The options are Enabled and Disabled.

VLAN ID

If VLAN Tagging above is set to Enabled, this item allows the user to change the VLAN ID. If VLAN Tagging is disabled, this item will be ignored by the ﬁrmware.

IP Address Source

Select the source of this machine's IP address. If Static is selected, you will need to know and enter manually the IP address of this machine below. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Conﬁguration Protocol) server in the network it is attached to, and request the next available IP address. The options are DHCP and Static.

IP Address

This item displays the IP address for the IPMI connection detected.

IP Subnet Mask

This item displays the IP Subnet Mask for the IPMI connection detected.

Default Gateway

This item displays the Default Gateway for the IPMI connection detected.

MAC Address

This item displays the MAC Address for the IPMI connection detected.

Update LAN Settings

This item saves the IPMI Lan Conﬁguration settings into memory. If you wish to change any of the settings, select Yes and press F10 to save your settings. Otherwise, leave this setting to its default setting of No.

4-22

Image 78

Contents Super Reproductive harm About This Manual Manual OrganizationConventions Used in the Manual Table of Contents Troubleshooting Bios AppendicesChecklist OverviewEurope Contacting SupermicroHeadquarters Asia-PaciﬁcX7DBU/X7DGU Image X7DBU/X7DGU Motherboard Layout Not drawn to scaleQuick Reference X7DBU/X7DGU Description Default SettingLE Indicators Description JumperChipset Motherboard FeaturesMemory Expansion SlotsOnboard I/O Acpi FeaturesDimensions OtherSystem Block Diagram for the X7DBU ESB2Xeon Quad-core/Dual-core Processor Features Chipset OverviewXeon Quad-core/Dual-core Processor Environmental Temperature Control Special FeaturesRecovery from AC Power Loss PC Health MonitoringMain Switch Override Mechanism Acpi FeaturesSlow Blinking LED for Suspend-State Indicator System Resource AlertPower Supply External Modem Ring-OnWake-On-LAN WOL Super I/O Page Precautions Static-Sensitive DevicesUnpacking Processor and Heatsink Installation Installation of the LGA771 ProcessorPage Installation of the Heatsink To Un-install the HeatsinkCEK Heatsink Installation Mounting the Motherboard in the Chassis Memory Support Installing DIMMsDimm Installation Memory performanceInstalling and Removing DIMMs Possible System Memory Allocation & AvailabilityControl Panel Connectors/IO Ports Back Panel Connectors/IO PortsBack Panel Connectors JF1 Header Pins FP Reset ButtoFront Control Panel Front Control Panel Pin Deﬁnitions NMI Button Power LEDPower LED Pin Deﬁnitions JF1 NMI Button Pin Deﬁnitions JF1HDD LED/FP UID Switch NIC1/NIC2 LED IndicatorsOH/Fan Fail/PWR Fail/FP UID LED Pin Deﬁnitions JF1 Power Fail LEDOverheat OH/Fan Fail/PWR Fail/FP UID LED OH/Fan Fail/PWR Fail/FP UID Indica Tor StatusReset Button Pin Deﬁnitions JF1 Reset ButtonPower Button Power Button Pin Deﬁnitions JF1Processor Power Connector Connecting CablesATX Power Connector ATX Power 20-pin Connector Pin DeﬁnitionsUniversal Serial Bus USB Chassis IntrusionPin Fan Header Pin Deﬁnitions Fan HeadersKeylock Keylock Pin DeﬁnitionsPS/2 Keyboard Mouse Port Pin Deﬁnitions ATX PS/2 Keyboard and PS/2 Mouse PortsSerial Ports Serial Port Pin DeﬁnitionsWake-On-Ring Wake-On-LANWake-On-LAN Pin Deﬁnitions Power LED/Speaker Speaker Connector Pin DeﬁnitionsGlan 1/2 Giga-bit Ethernet Ports OH/Fan Fail LED Pin Deﬁnitions Overheat LED/Fan Fail JOH1Overheat LED Pin Deﬁnitions SMB Header Pin DeﬁnitionsPower SMB I2 C Connector VGA ConnectorUnit Identiﬁcation Switches Sgpio HeadersGlan Enable Jumper Settings Jumper SettingsGlan Enable/Disable Explanation JumpersWatch Dog Enable/Disable Watch Dog Jumper Settings JWDCmos Clear VGA Enable/Disable VGA Enable/Disable Jumper Settings JPG1I2C Bus to PCI Slots Jumper Settings I2C Bus to PCI Slots 1/2Onboard Indicators Glan Activity Indicator Jumper SettingsGlan LEDs Onboard Power LED LE1 Onboard PWR LED Indicator LE1Floppy Connector StepSimso Ipmi Slot IDE Connector BaleSXB1/SXB2 Slots No Power Troubleshooting ProceduresBefore Power On Losing the System’s Setup ConﬁgurationTechnical Support Procedures Memory ErrorsFrequently Asked Questions Question How do I update my BIOS?Returning Merchandise for Service Question Whats on the CD that came with my motherboard?Starting the Setup Utility System BiosHow To Change the Conﬁguration Data IntroductionRunning Setup Main Bios SetupPress the Delete key to enter Setup Main Bios Setup Menu Main Setup FeaturesUltra DMA Mode LBA Mode ControlTransfer Mode Sata Controller ModeSystem Memory ICH RAID Code Base Available when Sata RAID is EnabledSata Ahci Available when Sata RAID is Disabled Extended MemoryAdvanced Setup Cache Video Bios Area Power Loss ControlMemory Cache Cache System Bios Area Resume On Modem RingDiscrete Mtrr Allocation Cache Base 512K-640KCache Extended Memory PCI ConﬁgurationPCI Parity Error Forwarding Default Primary Video AdapterEmulated IRQ Solutions PCI Fast Delayed TransactionLarge Disk Access Mode Enable MasterLatency Timer Serr Signal ConditionCrystal Beach Features Memory Branch ModeHigh Temperature Dram Operation Branch 0/1 Rank Interleaving & SparingCore-Multi-Processing Available when supported by the CPU Clock Spectrum FeatureFrequency Ratio Available when supported by the CPU Machine Checking Available when supported by the CPUHardware Prefetcher Available when supported by the CPU C1 Enhanced Mode Available when supported by the CPUExecute Disable Bit Available when supported by the CPU Direct Cache Access Available when supported by the CPUKBC Clock Input Intel Eist Support Available when supported by the CPUI/O Device Conﬁguration Serial Port aEvent Log Validity Floppy Disk ControllerDMI Event Logging Event Log CapacityBaud Rate Console RedirectionCOM Port Address Console TypeOverheat Alarm Peci Agent 1/2 Temperatures/System TemperatureHardware Monitor Fan Speed Control Modes System TemperatureFan1-Fan8 Speeds Voltage MonitoringSystem Event Logging Bios Post ErrorsBios Post Watch Dog Clear System Event LoggingSystem Event Log/System Event Log List Mode OS Boot Watch DogTimer for Loading OS Minutes Time Out OptionRealtime Sensor Data IPMI LAN ConﬁgurationVlan Tagging Default GatewayUpdate LAN Settings IP Address SourceSecurity Boot Boot Priority Order/Excluded from Boot OrdersExit Page Appendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B Installing the Windows OS Page Installing other Software Programs and Drivers Driver/Tool Installation Display ScreenConﬁguring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control