SUPER MICRO Computer H8QG6+-F, H8QGI+-F USB Conﬁguration, USB Mass Storage Device Conﬁguration

Page 63

Chapter 4: BIOS

USB Conﬁguration

This submenu displays the Module Version and lists the USB devices that are enabled as well as the following options.

Legacy USB Support

Select "Enabled" to enable the support for USB Legacy. Disable Legacy support if there are no USB devices installed in the system. "Auto" disabled Legacy support if no USB devices are connected. The options are Disabled, Enabled and Auto.

USB 2.0 Controller Mode

Use this setting to conﬁgure the USB 2.0 Controller in either Hi-Speed(480 Mps) or Full Speed (12 Mps) mode.

BIOS EHCI Hand Off

This is a workaround for OS's without EHCI hand-off support. The EHCI ownership change should be claimed by the EHCI driver. Options are Enabled or Disabled.

Legacy USB1.1 HC Support

This option Enables or Disables support for USB1.1 HC devices.

USB Mass Storage Device Conﬁguration

This submenu is used to conﬁgure USB mass storage class devices.

USB Mass Storage Reset Delay

Use this option to set the number of seconds POST waits for the USB mass storage device after the Start Unit command. Options include 10, 20, 30 and 40 seconds.

Emulation Type

This sets the emulation type for USB mass storage devices. If Auto, USB devices less than 530 MB will be emulated as Floppy and remaining as Hard Disk drive. The Force FDD option can be used to force a HDD formatted drive to boot as an FDD (example: ZIP drive). Options include Auto, Floppy, Forced FDD, Hard Disk and CD-ROM.

4-9

Image 63

Contents Super Page Manual Organization About This ManualH8QG6/i+-F Serverboard User’s Manual Table of Contents Sgpio Troubleshooting Viii Overview ChecklistAsia-Paciﬁc Contacting SupermicroHeadquarters EuropeH8QG6+-F Image H8QG6/i+-F Motherboard Layout H8QG6/i+-F Quick Reference Jumper Description Default SettingConnector Description Expansion Slots Motherboard FeaturesMemory ChipsetOther Acpi FeaturesDimensions Onboard I/OAMD SR5690/SP5100 Chipset System Block Diagram HyperTransport Technology Chipset OverviewPC Health Monitoring AMD SR5690/SP5100 ChipsetsPower Conﬁguration Settings Power Supply Super I/OWake-On-LAN WOL Page H8QG6/i+-F Serverboard User’s Manual Page Installation Procedure Processor and Heatsink InstallationInstalling the Heatsinks Mounting the Motherboard into a Chassis Installing MemoryMemory Support Maximum MemoryTop View of DDR3 Slot # Dimms CPU Per Channel Dimm Populations OptionsPossible System Memory Allocation & Availability PCI Expansion Cards Installing a PCI Expansion CardFront Control Panel I/O Port and Control Panel ConnectionsHDD/FP UID Switch Connector DeﬁnitionsPower Connectors Pwon ConnectorOverheat OH/Fan Fail/PWR Fail/UID Reset ConnectorUSB Headers Video ConnectorCompact Flash Card PWR Connector Universal Serial Bus PortsFan Headers Serial PortsWake-On-LAN Chassis Intrusion Power I2CSMBus Header ATX PS/2 Keyboard and PS/2 Mouse PortsPower LED/Speaker Overheat LEDUnit Identiﬁer Button JTPM1 Trusted Platform Module HeaderCmos Clear Jumper SettingsVGA Enable/Disable Explanation of JumpersI2C to PCI-Express Slot Watch Dog Enable/DisableLAN1/2 Enable/Disable SAS Enable/DisableBMC Jumper USB Wake-UpOnboard Indicators LAN1/LAN2 LEDsDedicated Ipmi LAN LEDs SAS and Sata Drive Connections Sata PortsSAS Ports H8QG6+-F Only Installing the OS/SATA Driver Enabling Sata RAIDSerial ATA Sata Bios Setup Screen Enabling Sata RAID in the BiosInstalling the RAID Driver During OS Installation Using the Adaptec RAID UtilityDriver/Tool Installation Display Screen Installing DriversSupero Doctor Supero Doctor III Interface Display Screen Remote Control Page Troubleshooting Procedures Before Power OnNo Power Memory Errors Losing the System’s Setup ConﬁgurationNo Video Question What type of memory does my motherboard support? Technical Support ProceduresFrequently Asked Questions Question How do I update my BIOS?Question Whats on the CD that came with my motherboard? Returning Merchandise for ServiceIntroduction Starting the Setup UtilityAdvanced Settings Menu Main MenuCPU Conﬁguration Primary/Secondary/Third IDE Master/Slave IDE ConﬁgurationBit Data Transfer DMA ModeIDE Detect Timeout Sec A.R.TAcpi Conﬁguration Advanced Acpi Conﬁguration SuperI/O ConﬁgurationIP Address Ipmi ConﬁgurationView BMC System Event Log Set LAN ConﬁgurationGateway Address MPS ConﬁgurationPCI Express Conﬁguration Subnet MaskRemote Access Conﬁguration USB Mass Storage Device Conﬁguration USB ConﬁgurationFan Speed Control Modes PCI/PNP Settings MenuSystem Health Monitor System Fan MonitorPallette Snooping IRQ3 ~ IRQ15 SettingsDMA Channel 0 ~ DMA Channel 7 Settings Allocate IRQ to PCI VGABios Settings Conﬁguration Boot Settings MenuSecurity Settings Menu NorthBridge Conﬁguration Memory Conﬁguration Chipset Settings MenuECC Conﬁguration SouthBridge Conﬁguration SB Debug Conﬁguration Dram Timing ConﬁgurationSATA-IDE Ports Auto Clk Ctrl Sata Port 0 ~ Port 5 ModeSata IDE Combined Mode Power Saving FeaturesRD890 Conﬁguration PCI Express Conﬁguration Port 02 ~ Port 13 FeaturesGPP1 ~ GPP3b Core Settings NB-SB Port FeaturesSB Core Setting Hyper Transport Conﬁguration Debug Option Exit MenuLoad Fail-Safe Defaults Load Optimal DefaultsH8QG6/i+-F Serverboard User’s Manual Amibios Error Beep Codes Appendix a Bios Error Beep CodesH8QG6/i+-F Serverboard User’s Manual Uncompressed Initialization Codes Appendix B Bios Post Checkpoint CodesBootblock Recovery Codes Uncompressed Initialization Codes H8DGU-F Serverboard User’s Manual Appendix B Bios Post Checkpoint Codes H8DGU-F Serverboard User’s Manual