SUPER MICRO Computer H8QGI+-F, H8QG6+-F user manual Exit Menu, Debug Option

H8QG6/i+-F Serverboard User’s Manual

Primary Video Controller

Use this setting to specify the primary video controller boot order. Options include PCIE-GPP1-GPP2-GPP3a-PCI, PCIE-GPP2-GPP1-GPP3a-PCI, PCIE-GPP3a- GPP1-GPP2-PCI or PCI-PCIE-GPP1-GPP2-GPP3a.

PCI Spread Spectrum

Use this setting to Enable or Disable PCI Spread Spectrum in the system.

Debug Option

Memory Decod on Sec. 6FX

Use this option to set memory decod on sector 6FX. Options are Disabled or Force.

IOC Peer-to-Peer Mode

Use this option to set the IOC peer-to-peer mode. Options include Auto, Default, Mode1 and Mode2

Northbridge Interrupt Pin

This option Enables or Disables the Northbridge Interrupt Pin.

4-8 Exit Menu

Select the Exit tab from AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen.

Save Changes and Exit

When you have completed the system configuration changes, select this option to leave BIOS Setup and reboot the computer, so the new system configuration parameters can take effect. Select Save Changes and Exit from the Exit menu and press <Enter>.

Discard Changes and Exit

Select this option to quit BIOS Setup without making any permanent changes to the system configuration and reboot the computer. Select Discard Changes and Exit from the Exit menu and press <Enter>.

Discard Changes

Select this option and press <Enter> to discard all the changes and return to AMI BIOS Utility Program.

4-22