SUPER MICRO Computer AS1011M-T2 user manual Installing the Heatsink Retention Modules

AS1011M-T2 User's Manual

Installing the Heatsink Retention Modules

One heatsink retention module (BKT-0005) and two screws are included in the retail box. Once installed, these are used to help attach the heatsink to the CPU. To install, position the module so that the CPU backplate standoffs insert through the holes on the heatsink retention module and the four feet on the module contact the motherboard. Secure the retention module to the backplate with the two screws provided. See Figure 2-1.

Note: BKT-0005 is included for use with third-party heatsinks only. When installing

aSupermicro heatsink (SNK-P0026), only BKT-0004 (CPU backplate) is needed. The BKT-0005 retention module was designed to provide compatibility with clip- and-cam type heatsinks from third parties.

Figure 5-1. Removing the Air Shroud

5-4