SUPER MICRO Computer AS1011M-T2 PS/2 Mouse Support, Wait for ‘F1’ If Error, Interrupt 19 Capture

Page 73

Chapter 7: BIOS

PS/2 Mouse Support

Set this value to allow the PS/2 mouse support to be modiﬁ ed. The options are Enabled, Disabled and Auto.

Wait for ‘F1’ If Error

Select Enabled to activate the function of Wait for "F1" if Error. T

Hit ‘DEL’ Message Display

Select Enabled to display Setup Message when the user hits the DEL key. The options are Enabled and Disabled.

Interrupt 19 Capture

Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled

and Disabled.

ACPI Version Features

Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI v2.0 and ACPI v3.0.

ACPI Settings

ACPI APIC Support

Select Enabled to allow the ACPI APIC Table Pointer to be included in the RSDT pointer list. The options are Enabled and Disabled.

ACPI OEMB Table

This setting when enabled will include an OEMB table pointer to pointer lists. Options are Enabled and Disabled.

Headless Mode

Use this setting to Enable or Disable headless operation mode through ACPI.

Suspend Mode

This setting is used to select the ACPI state used for system suspend. The options are S1 (POS), S3 (STR) and Auto.

7-3

Image 73

Contents AS1011M-T2 Manual Revision Release Date November 30 About This Manual PrefaceManual Organization Advanced Motherboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents HDD LED NIC1/NIC2 LED Advanced Motherboard SetupSgpio Advanced Chassis SetupAppendices BiosPage Overview Chapter IntroductionMotherboard Features Onboard Controllers/Ports Other FeaturesSystem Power Server Chassis FeaturesControl Panel Rear I/O PanelHeadquarters Contacting SupermicroEurope Asia-PaciﬁcPage Preparing for Setup Chapter Server InstallationUnpacking the System Rack Precautions Choosing a Setup LocationServer Precautions Rack Mounting Considerations Identifying the Sections of the Rack Rails Installing the System into a RackInstalling the Rack Rails Installing the Chassis RailsInstalling the Server into a Rack Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackChecking the Motherboard Setup Accessing the Inside of the System Checking the Drive Bay Setup Control Panel Buttons Chapter System InterfaceControl Panel LEDs Serial ATA Drive Carrier LEDs Page Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsPrecautions Chapter Advanced Motherboard SetupHandling the Motherboard UnpackingInstalling the Processor Processor and Heatsink InstallationMounting the Motherboard into a Chassis Installing the Heatsink Removing the Air Shroud Installing the Heatsink Retention ModulesConnecting Data Cables Connecting CablesConnecting Power Cables Front Control Panel Header Pins JF1 Connecting the Control PanelI/O Ports Installing MemorySupport Side and Top Views of DDR InstallationAdding PCI Cards PCI card installationPCI slots Super H8SMi-2 Motherboard DetailsConnectors Description Jumpers Description Default SettingH8SMi-2 Quick Reference LEDs DescriptionATX Power Connector Connector DeﬁnitionsAuxiliary Power Connector Power LEDReset Button Power Fail LEDOverheat/Fan Fail LED Universal Serial Bus Ports JUSB1 Power ButtonUSB Headers Serial Ports ATX PS/2 Keyboard and PS/2 Mouse PortsFan Headers LAN1/2 Ethernet PortsOverheat LED Power LED/SpeakerChassis Intrusion Wake-On-LANWake-On-Ring Redundant Power Supply Fail HeaderSMBus Header UID LED HeaderCompact Flash Power Power Fail Alarm Reset HeaderExplanation Jumpers Jumper SettingsCmos Clear I2C to PCI Enable/Disable VGA Enable/DisableWatch Dog USB Power Onboard Speaker Enable/ DisablePS2 Power Compact Flash Master/SlaveOnboard Power LED Onboard IndicatorsLAN1/LAN2 LEDs Floppy, IDE, Parallel Port and Sata Drive Connections Floppy ConnectorSata Ports IDE ConnectorParallel Printer Port Pin Deﬁnitions Parallel PortEnabling Sata RAID in the Bios Installing the OS/SATA DriverEnabling Sata RAID Serial ATA SataInstalling the OS and Drivers Using the nVidia RAID UtilityDriver/Tool Installation Display Screen Installing DriversPrecautions Chapter Advanced Chassis SetupStatic-Sensitive Devices Tools RequiredChassis Front View Control PanelSystem Fans Installing a new fanSystem Fan Failure Replacing System FansAccessing the Drive Bays Drive Bay Installation/RemovalSerial ATA Drive Installation Mounting a Serial ATA drive in a drive carrierInstalling/removing hot-swap Serial ATA drives Serial ATA Backplane CD-ROM and Floppy Drive InstallationPower Supply Failure Power SupplyReplacing the Power Supply Removing the power supplyPage Chapter Starting the Setup UtilityIntroduction Boot Features Advanced Settings MenuMain Menu Acpi Version Features Wait for ‘F1’ If ErrorAcpi Settings Acpi Apic Support Headless ModeCPU Conﬁguration Floppy/IDE/SATA Conﬁguration Primary IDE Master/Slave LBA/Large ModeType Block Multi-Sector TransferA.R.T DMA ModeBit Data Transfer Serial ATA0/1/2 Primary/Secondary ChannelIDE Detect Time Out Sec Hard Disk Write ProtectAtapi 80Pin Cable Detection PCI/PnP Conﬁguration Super IO Conﬁguration NorthBridge Conﬁguration Advanced Chipset ConﬁgurationSouthBridge/MCP55 Conﬁguration Bios Ehci Hand-Off USB 2.0 Controller ModePcie Spread Spectrum Sata Spread SpectrumEvent Log Conﬁguration Remote Access ConﬁgurationSystem Health Monitor Clear BMC System Event Log View BMC System Event LogSet LAN Conﬁguration IP AddressBoot Device Priority Boot MenuHard Disk Drives Removable DrivesExit Menu Security MenuLoad Fail-Safe Defaults Load Optimal DefaultsPage Amibios Error Beep Codes Appendix a Bios Error Beep CodesBeep Code Error Message Description Page Uncompressed Initialization Codes Appendix B Bios Post Checkpoint CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h Page Appendix C System Speciﬁcations Power Supply WeightMotherboard ChassisRegulatory Compliance