SUPER MICRO Computer AS 1020C-3 user manual Additional Functions, Selecting Drives for the Array

Chapter 5: Advanced Serverboard Setup

4.Once all drives have been selected for the RAID array, you will be prompted to select the RAID properties, including the type of RAID to be used, label, array size and stripe size (see Figure C-5). When the properties have been defi ned, highlight

Done and press the <Enter> key.

Additional Functions

The tree diagram in Figure 5-9 gives you an overview of the functions included in the SAS Controller Utility. Refer to this tree to help you navigate through the menus for the function you wish to perform.

Figure 5-9. Selecting Drives for the Array

5-29