SUPER MICRO Computer H8QM8-2 Boot up Num-Lock, PS/2 Mouse Support, Wait for ‘F1’ If Error

Page 55

Chapter 4: BIOS

Boot up Num-Lock

Set this value to allow the Number Lock setting to be modified during boot up. The options are On and Off.

PS/2 Mouse Support

Set this value to modify support for a PS/2 mouse. The options are Auto, En- abled and Disabled.

Wait for ‘F1’ If Error

Select Enable to activate the Wait for F1 if Error function. The options are Enabled and Disabled.

Hit ‘DEL’ Message Display

Select Enabled to display message to hit the DEL key to enter Setup. The op- tions are Enabled and Disabled.

Interrupt 19 Capture

Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and Disabled.

OS Installation

Change this setting if using a 64-bit Linux operating system. The available op- tions are Other and Linux.

ACPI Version Features

Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI v2.0 and ACPI v3.0.

ACPI APIC Support

Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and Disabled.

ACPI OEMB Table

Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and Disabled.

Headless Mode

Use this setting to Enable or Disable headless operation mode through ACPI.

4-3

Image 55
Contents Super Manual Revision 1.0d Release Date September 9 Manual Organization About This ManualTable of Contents Table of Contents Bios TroubleshootingAppendices Overview ChecklistAsia-Pacific Contacting SupermicroHeadquarters EuropeH8QM8-2/H8QME-2 Image Super H8QM8-2 Connectors Description Jumpers Description Default SettingH8QM8-2/H8QME-2 Quick Reference CPU Serverboard FeaturesOther NVidia MCP55 Pro/AMD-8132 Chipset HyperTransport Technology Chipset OverviewMCP55 Pro Media and Communications Processor AMD-8132 HyperTransport PCI-X TunnelCPU Overheat/Fan Fail LED and Control Auto-Switching Voltage Regulator for the CPU CorePC Health Monitoring Fan Status Monitor with Firmware/Software Speed ControlPower Configuration Settings Wake-On-Ring Header Jwor Power SupplySuper I/O H8QM8-2/H8QME-2 User’s Manual Unpacking PrecautionsInstallation Procedures Static-Sensitive DevicesCPU Backplates Processor and Heatsink InstallationPage Installing the Heatsink Installing the Heatsink Retention ModulesMounting the Serverboard into a Chassis Installing MemorySide and Top Views of DDR Installation Front Control Panel I/O Port and Control Panel ConnectionsNMI Button Connecting CablesATX Power Connector Processor Power ConnectorOverheat/Fan Fail LED Power LEDUniversal Serial Bus Ports USB0/1 Power Fail LEDReset Button Power ButtonChipset Fan Headers USB HeadersSerial Ports Fan HeadersOverheat LED Power LED/Keylock/SpeakerATX PS/2 Keyboard and PS/2 Mouse Ports Chassis IntrusionWake-On-Ring System Management Bus Power Header Pssmbus3rd Power Supply Alarm Reset Header Wake-On-LAN3rd Power Supply Fail Detect Header Compact Flash Power HeadersJLAN1/2 Ethernet Ports Explanation Jumpers Jumper SettingsCmos Clear I2C to PCI-E Slots Enable/ Disable VGA Enable/DisableJlan Enable/Disable I2C to PCI-X Slots Enable/ DisableScsi Termination Enable/ Disable H8QM8-2 only Scsi Controller Enable/ Disable H8QM8-2 onlyCompact Flash Master/Slave PCI-X Slot Frequency Select Watch Dog Enable/DisableOnboard Power LED DP2 Onboard IndicatorsJLAN1/JLAN2 LEDs Floppy, IDE, Parallel Port, Scsi and Sata Drive Connections Floppy ConnectorIDE Connector Sata Ports Parallel Port ConnectorDiffsens Termpwr Scsi Connectors H8QM8-2 onlySerial ATA Sata Installing the OS/SATA DriverEnabling Sata RAID in the Bios Enabling Sata RAIDInstalling the OS and Drivers Using the nVidia RAID UtilitySata RAID Utility Main Screen Driver Installation Display Screen Installing Software DriversPage No Video Troubleshooting ProceduresBefore Power On No PowerMemory Errors Technical Support ProceduresLosing the System’s Setup Configuration Question What type of memory does my serverboard support? Frequently Asked QuestionsReturning Merchandise for Service Introduction Starting the Setup UtilityBoot Features Advanced Settings MenuMain Menu Acpi Version Features Boot up Num-LockWait for ‘F1’ If Error OS InstallationCPU Configuration Floppy/IDE/SATA Configuration NVidia RAID SetupBlock Multi-Sector Transfer LBA/Large ModePrimary IDE Master/Slave TypeSerial ATA0/1/2 Primary/Secondary Channel DMA ModeA.R.T Bit Data TransferIDE Detect Time Out Sec Hard Disk Write ProtectPCI/PnP Configuration Super IO Configuration NorthBridge Configuration Chipset ConfigurationMem Clk Tristate C3/ALTVID CS Sparing EnableECC Configuration Dram ECC Enable Bit ECC ModeSouthBridge Configuration Event Log Configuration Remote Access ConfigurationSystem Fan Monitor System Health MonitorRemovable Drives Boot MenuBoot Device Priority Hard Disk DrivesSecurity Menu Change Supervisor PasswordChange User Password Boot Sector Virus ProtectionExit Menu Beep Code Error Message Description Amibios Error Beep CodesH8QM8-2/H8QME-2 User’s Manual Uncompressed Initialization Codes Appendix B Bios Post Checkpoint CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h