SUPER MICRO Computer H8QME-2, H8QM8-2 user manual VGA Enable/Disable, Jlan Enable/Disable

H8QM8-2/H8QME-2 User's Manual

VGA Enable/Disable

JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper set- tings.

JLAN Enable/Disable

Change the setting of jumper JPL1 to enable or disable the JLAN1 and JLAN2 Gb Ethernet ports. See the table on the right for jumper settings. The default setting is enabled.

I2C to PCI-X Slots Enable/ Disable

The JI2C1/2 pair of jumpers allows you to connect the System Management Bus to the PCI-X slots. The default setting is pins 2-3 for both jumpers to disable the connection. Both connec- tors must be set the same (JI2C1 is for data and JI2C2 is for the clock). See the table on right for jumper settings.

I2C to PCI-E Slots Enable/ Disable

The JI2C3/4 pair of jumpers allows you to connect the System Management Bus to the PCI-Express slots. The de- fault setting is pins 2-3 for both jumpers to disable the connection. Both con- nectors must be set the same (JI2C3 is for data and JI2C4 is for the clock). See the table on right for jumper settings.

VGA Enable/Disable

Jumper Settings (JPG1)

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

JLAN1/2 Enable/Disable

Jumper Settings (JPL1)

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

I2C to PCI-X Slots Enable/Disable Jumper Settings (JI2C1/2)

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

I2C to PCI-E Slots Enable/Disable Jumper Settings (JI2C3/4)

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

2-16