StorCase Technology DS100 manual Packaging Information, Serial Number

Page 10

Introduction

1

 

 

INTRODUCTION

Packaging Information

The StorCase Technology Data Silo® external expansion chassis is shipped in a container designed to provide protection and prevent damage during shipment. The Data Silo was carefully inspected before and during the packing procedure at the factory. Evidence of any damage to the Data Silo should be reported to the shipper immediately.

If the wrong Data Silo model has been received, please call your reseller or StorCase at (800) 435-0642 to arrange for a Return Material Authorization (RMA). StorCase cannot accept returns which do not display an RMA number on the outside of the package. Return the unit with all the original packing materials.

Before removing any component from its packaging, discharge any static electricity by touching a properly grounded metal object.

Serial Number

The DS100 is labeled with a serial number. This number must be reported to the StorCase Customer Service Representative in order to receive a Return Material Authorization (RMA) for warranty claims. Locate the serial number label and record the number in the space provided below.

Serial Number:

 

 

 

DS100 (U320) User's Guide - Rev. A02

StorCase Technology, Inc.

Image 10
Contents Data Silo DS100 Data Silo DS100 Part No. D89-0000-0208 A02 MayLimited Warranty Free Technical Support Declaration of Conformity CSA NRTL/C TUVFederal Communications Commission FCC Statement RadiofrequencyinterferencestatementImportant Safety Instructions Wichtige SicherheitshinweiseTable of Contents Scsi ID Selection Switches List of Figures contdPackaging Information Serial NumberGeneral Description Data Silo DS100 FamilyOn LED Front Panel DS100 Front Panel DS100 2-Bay ShownDS100 Rear Panel DS100 Rear Panel DS100 2-Bay ShownInstalling the Drives into the DS100 Removing the DS100 CoverDrive Preparation Removing the Cover Bay ShownIf Installing a 8-BIT Scsi Device RowIf Installing a 16-BIT Scsi Device Typical Drive 16-Bit Single-Ended ID Select PinsDrive Installation If Installing a Drive Into the DS100 1-BAY or DS100 2-BAYRemoving the Drive Mounting Bracket DS100 2-Bay Shown 0539 0541A If Installing a Drive Into the DS100 4-BAY Page Scsi ID Selection Switch Selecting the Scsi ID NumberConnecting the DS100 to the Computer System Host ControllerThis Page Left Blank Intentionally Appendices Appendix a Specifications/Dimensions Environmental Specifications Operating StorageAppendix a Specifications/Dimensions Appendix B Fuse Removal Figure B-1 Removing the FuseReaders Comments S I N E S S R E P LY M a I L