StorCase Technology manual Removing the Drive Mounting Bracket DS100 2-Bay Shown

Installation		11
	Drive Mounting
	Bracket
	S1	S2

Drive Mounting

Bracket Screws

(4 Plcs)

0540A

Figure 10: Removing the Drive Mounting Bracket

(DS100 2-Bay Shown)

5.If installing any 3.5" devices into the DS100, attach the 3.5" adapter brackets (included) to the drives before installing them into the drive mounting bracket (Figure 11). The adapter brackets can be attached to the drive with four (4) #6-32 Phillips screws.

6.Attach the drive activity and drive fault LED cables to the appropriate drive pins (refer to the device manufacturer's documentation for the location of these pins).

3.5” Drive

(Not Included)

LEFT

SIDE

SCSI ID

W	FACTORY
AR		NEW
	NI
	NG

SIDE

RIGHT

Adapter Bracket

(1 Pair per Drive Bay)

0543

#6-32 Phillips Pan Hd. Screw (4 Plcs per Drive)

Figure 11: Attaching the 3.5" Adapter Brackets to the Drive

DS100 (U320) User's Guide - Rev. A02 StorCase Technology, Inc.