Set up the computer
To set up the computer, you will
1.Insert the battery into the computer.
2.Connect the computer to external power.
✎The battery begins to charge.
3.Turn on the computer.
4.Set up the software.
5.Create recovery discs (recommended).
✎Refer to Appendix C, “Backup and recovery,” for instructions.
ÄCAUTION: To prevent file corruption and to ensure that the correct drivers are installed:
■� Do not set up the computer for the first time while the computer is docked in an optional docking device.
■� During the hardware and software setup procedures:
❏� Do not unplug the computer from external power.
❏� Do not shut down the computer or initiate standby or hibernation.
Getting Started� |