SMC Networks SMC8126L2 manual End Station, Fast Ethernet, Full Duplex, Gigabit Ethernet, Ieee

Page 58

Glossary

CSMA/CD

CSMA/CD (Carrier Sense Multiple Access/Collision Detect) is the communication method employed by Ethernet, Fast Ethernet, or Gigabit Ethernet.

End Station

A workstation, server, or other device that does not forward traffic.

Ethernet

A network communication system developed and standardized by DEC, Intel, and Xerox, using baseband transmission, CSMA/CD access, logical bus topology, and coaxial cable. The successor IEEE 802.3 standard provides for integration into the OSI model and extends the physical layer and media with repeaters and implementations that operate on fiber, thin coax and twisted-pair cable.

Fast Ethernet

A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method.

Full Duplex

Transmission method that allows two network devices to transmit and receive concurrently, effectively doubling the bandwidth of that link.

Gigabit Ethernet

A 1000 Mbps network communication system based on Ethernet and the CSMA/CD access method.

IEEE

Institute of Electrical and Electronic Engineers.

IEEE 802.3

Defines carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications.

IEEE 802.3ab

Defines CSMA/CD access method and physical layer specifications for 1000BASE-T Gigabit Ethernet. (Now incorporated in IEEE 802.3-2005.)

IEEE 802.3u

Defines CSMA/CD access method and physical layer specifications for 100BASE-TX Fast Ethernet. (Now incorporated in IEEE 802.3-2005.)

Glossary-2

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Installation Guide Page TigerSwitch 10/100/1000 Installation Guide Page Compliances and Safety Warnings N11846 Safety Compliance Power Cord Set France et Pérou uniquement Sein und die Aufschrift HAR oder Basec tragen Manufacturing Materials End of Product Life SpanDocumentation Viii Contents Making Network Connections Appendix a TroubleshootingAppendix C Specifications Appendix B CablesAppendix D Ordering Information Glossary Index Xii Tables Figures Introduction OverviewSwitch Architecture Network Management OptionsSFP Slots Description of Hardware10/100/1000BASE-T Ports Port and System Status LEDsLED Connectivity Features and BenefitsPower Supply Socket ExpandabilityManagement Introduction to Switching Network PlanningApplication Examples Collapsed BackboneNetwork Aggregation Plan Network Aggregation PlanRemote Connections with Fiber Cable Remote Connections with Fiber CableMaking Vlan Connections Making Vlan ConnectionsApplication Notes Selecting a Site Installing the SwitchEthernet Cabling Package Contents Equipment ChecklistOptional Rack-Mounting Equipment Mounting Rack MountingInstalling the Switch in a Rack Desktop or Shelf MountingInstalling an Optional SFP Transceiver Inserting an SFP Transceiver into a SlotConnecting to a Power Source Connecting to the Console PortWiring Map for Serial Cable Serial Cable Wiring Switch’s 8-Pin Null Modem PC’s 9-PinInstalling the Switch Twisted-Pair Devices Connecting Network DevicesMaking Network Connections Cabling GuidelinesConnecting to PCs, Servers, Hubs and Switches Network Wiring ConnectionsNetwork Wiring Connections Fiber Optic SFP DevicesConnectivity Rules Making Connections to SFP TransceiversMbps Gigabit Ethernet Collision Domain 1000BASE-T Cable RequirementsMbps Fast Ethernet Collision Domain Cable Labeling and Connection Records Mbps Ethernet Collision DomainPower and Cooling Problems Appendix a TroubleshootingDiagnosing Switch Indicators InstallationIn-Band Access Twisted-Pair Cable and Pin Assignments Appendix B Cables10BASE-T/100BASE-TX Pin Assignments Straight-Through Wiring Crossover Wiring1000BASE-T Pin Assignments Twisted-Pair Cable and Pin Assignments BAdjusting Existing Category 5 Cabling to Run 1000BASE-T Cable Testing for Existing Category 5 CableFiber Standards Appendix C Specifications Physical CharacteristicsManagement Features Switch FeaturesStandards Compliances CE MarkSpecifications Appendix D Ordering Information Ordering Information Glossary Fast Ethernet End StationEthernet Full DuplexRJ-45 Connector Media Access Control MACRedundant Power Supply RPS Switched PortsTransmission Control Protocol/Internet Protocol TCP/IP Virtual LAN VlanIndex NumericsIndex Page Technical Support

SMC8126L2 specifications

The SMC8126L2 is a robust Layer 2 managed switch developed by SMC Networks, designed to meet the demands of modern networking environments. This switch is part of the SMC's lineup of network solutions, emphasizing reliability, efficiency, and advanced functionalities suitable for both small and medium-sized enterprises.

One of the standout features of the SMC8126L2 is its support for 26 ports, which allow multiple devices to connect seamlessly. This includes 24 Fast Ethernet ports (10/100 Mbps) and 2 gigabit uplink ports. This configuration enables flexible network designs and enhances the bandwidth availability for devices that require faster data transmission.

The SMC8126L2 is equipped with various Layer 2 switching capabilities, including port-based Virtual LAN (VLAN) support, allowing businesses to segment their networks for better security and performance. This capability ensures that sensitive data remains isolated and reduces broadcast traffic across the entire network. The switch also supports 802.1Q tagging for VLAN configuration, facilitating the management of multiple VLANs simultaneously.

Quality of Service (QoS) is another significant aspect of the SMC8126L2. It employs intelligent traffic management features, prioritizing critical applications such as VoIP and video conferencing. This ensures that time-sensitive data packets are transmitted efficiently, minimizing latency and improving overall user experience. The switch supports multiple QoS mechanisms, such as 802.1p priority tagging and port-based scheduling, thus accommodating varied networking needs.

Security features are paramount in the SMC8126L2, with network access control through Port Security and MAC address filtering. This prevents unauthorized access and enhances the security posture of the network. Additionally, the switch supports IGMP Snooping, which conserves bandwidth by ensuring that multicast traffic is only sent to ports that require it.

Another remarkable aspect of the SMC8126L2 is its management capabilities. The switch can be managed through various methods, including web-based interfaces, command-line interfaces (CLI), and SNMP (Simple Network Management Protocol). This flexibility allows network administrators to monitor performance, configure settings, and troubleshoot issues effectively.

In summary, the SMC8126L2 brings a suite of advanced features and technologies that cater to the evolving requirements of networking. With its extensive port options, VLAN support, QoS capabilities, robust security measures, and versatile management interfaces, the SMC8126L2 stands out as a reliable choice for organizations looking to enhance their networking infrastructure. Its performance and reliability make it well-suited for addressing the challenges of modern network environments while ensuring efficient data flow and security.
Top Page Image Contents