SMC Networks manual Configuring the SMCWHSG44-G, Entering the Password

Page 27

address of the computer to 192.168.2.xxx (the default IP address of the SMCWHSG44-Gis 192.168.2.1) and the subnet mask to 255.255.255.0.) It is preferred to set the computer to “obtain an IP address automatically” so the router will give your computer the correct settings automatically.

NOTE: For some versions of Windows, the computer needs to be restarted for the changes of TCP/IP settings to take effect.

1.8. Configuring the SMCWHSG44-G

The SMCWHSG44-Gis DHCP server enabled by default. After the IP addressing is configured, launch a Web browser on the managing computer. Then, go to “http://192.168.2.1” to log on to the Wireless Hotspot Gateway for Web-based management.

1.8.1. Entering the Password

To log onto the Web based management interface, you will be prompted to enter the password. For first-time configuration, default password is “smcadmin”. And then, click the LOGIN button.

Fig. 9. Entering the Password.

NOTE: It is strongly recommended that the password be changed to another value for security reasons. On the start page, go to the SYSTEM\Password Settings page to change the value of the password (see Section 2.3.2 for more information).

26

Image 27

Contents SMCWHSG44-G Page Trademarks CopyrightLimited Warranty Page Federal Communication Commission Interference Statement FCC Radiation Exposure StatementIndustry Canada Class B EC Conformance Declaration Power Cord Safety Safety ComplianceSchuko Page Wichtige Sicherheitshinweise Germany Schuko Page Table of Contents System Page SMCWHSG44-G SMCWHS-POS Introduction Overview Features User Authentication, Authorization, and Accounting AAAIeee 802.11b/g Compliant Wireless Operation Internet Connection Sharing Network Security Firmware Tools Package Checklist LED DefinitionRear Panel POE enabled LAN Port Position Selecting a Power Supply MethodMounting the SMCWHSG44-G on a Wall Changing the TCP/IP Settings of the Managing Computer Preparing for ConfigurationEntering the Password Configuring the SMCWHSG44-GHome Setup Wizard Selecting an Operational ModePage Router with a Static-IP DSL/Cable Connection Router with a DHCP-Based DSL/Cable ConnectionRouter with Multiple DSL/Cable Connections Setup Wizard Configuring Ieee 802.11 Settings Setup Wizard Configuring Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsAuthentication protocol Local Authentication SeverPage Account Table List How to Setup the Mini-POS Ticket PrinterIeee Radius Settings Allowable Authentication Modes Configuring Radius SettingsDeploying the SMCWHSG44-G Setting up Client ComputersConfiguring Ieee 802.11-Related Settings To establish a wireless link to an APConfiguring TCP/IP-Related Settings Page Authentication Success Overview Menu StructureLogout Page Save, Save & Restart, and Cancel Commands Home and Refresh CommandsStatus Associated Wireless Clients Account Table Authenticated UsersManaged LAN Devices Session ListSystem Specifying Operational ModeManaging Firmware Changing PasswordBacking up and Restoring Configuration Settings by Http To upgrade firmware of the SMCWHSG44-G by HttpUpgrading Firmware by Http Upgrading Firmware by Tftp To upgrade firmware of the SMCWHSG44-G by TftpTo back up configuration of the SMCWHSG44-G by Tftp Backing up and Restoring Configuration Settings by TftpTo restore configuration of the SMCWHSG44-G by Tftp Resetting Configuration to Factory Defaults Configuring TCP/IP Related Settings AddressTime Zone Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable Connection DNS DNS Proxy NAT Basic Host Address ResolutionTo expose preset internal servers Virtual Server MappingsDhcp Server Ii. Static Dhcp Mappings Dhcp Server BasicDhcp Relay Load BalancingTo always assign an IP address to a specific Dhcp client Configuring Ieee 802.11-Related Settings Wireless Basic Zero Client ReconfigurationWireless Distribution System To enable a WDS link Wireless Distribution System SettingsNetwork Topology Containing a Loop SecurityPage MAC-Address-Based Access Control Settings MAC-Address-Based Access ControlTo deny wireless clients access to the wireless network To grant wireless clients access to the wireless networkIeee 802.1x/RADIUS Ieee 802.1x/RADIUS Settings Configuring Authentication Settings AAA Basic Default Authentication Failure Warning To specify an uncontrolled computer by MAC address Unrestricted ClientsRadius Basic Walled GardenRobustness Log-On Page Customization Settings Authentication Session ControlAuthentication Success Page Customization Settings Ddns Advertisement Links SettingsIcmp TCP UDP Vlan FirewallTo set a rule for packet filtering URL Filters Management BasicTo block Http traffic to an unwelcome Web site System Log UPnPSnmp Access RulesLAN Device Management Unrestricted Host MAC Address SettingsTo specify a LAN device to manage Example for LAN Device ManagementAppendix a Default SettingsLED Definitions TCP/IP Setting Problems Page Other Problems Wireless Settings ProblemsAppendix C Distances and Data Rates Standards Network ConfigurationTransmission output Power Configuration and ManagementKeypad Ad Hoc Access PointAuthentication Basic Service Set BSSEncryption Dynamic Host Configuration Protocol DhcpExtended Service Set ESS Extensible Authentication Protocol EAPLocal Area Network LAN Inter Access Point Protocol IappPower over Ethernet PoE InfrastructureSession Key Service Set Identifier SsidWireless Distribution System WDS Wi-Fi Protected AccessWPA Pre-shared Key PSK Wired Equivalent Privacy WEPPage For Technical SUPPORT, Call