SMC Networks SMCWHSG44-G manual Ieee

Unit” and a value for the number of minutes for “Units of Session time”. In order to produce a ticket from the Mini-POS Ticket Printer, you will need to key in selected numbers, and press ENTER. The numbers you select on the keypad will always correspond to the Units of Session Time.

•For Example: You have assigned “3” as the value for the Amount of Money Per Unit. You have assigned “30” as the number of minutes equal to 1 Unit of Session Time.

Ticket Settings for Ticket printing

Based on this Ticket Setting, if the client requests 1 hour of access time then you must press the following three keys on the Control Keypad: 0_2_ENTER

In other words, 02 Units of Session Time x (30 minutes per Unit) = 1 hour. In this case, the ticket will show that the amount owed by the customer is 6 USD.

NOTE: You will always need to key in at least 2 digits on they keypad before

pressing ENTER (For example: 02 = 2 “Units of Session Time”).

10.After pressing the 'Enter' button on the control keypad, the new local account will be automatically generated, and the billing ticket will be printed simultaneously.

To make sure the Mini-POS Ticket Printer is in good condition, you can print out the paper by holding the 'FEED' button. Make sure the Mode light is off to do this. Also check the status of the lights. The power light should be blue and the mode light should be red.

1.8.6.4. IEEE 802.1x

Fig. 26. Changing security mode to an IEEE 802.1x option.

If you want to do IEEE 802.1x-based user authentication, go to the Wireless\ Security section, and then change the Security mode setting to an IEEE 802.1x-related option according to your needs. The SMCWHSG44-G supports IEEE 802.1x EAP-MD5 and EAP-TLS authentication methods. Click Save when finished.

36