SMC Networks SMCWHSG44-G manual Setup Wizard Configuring Dhcp Server Settings

Page 32

1.8.4. SETUP WIZARD Step 3: Configuring DHCP Server Settings

Fig. 16. DHCP Server Settings.

The SMCWHSG44-Gcan automatically assign IP addresses to client computers by DHCP. DHCP server settings include Default gateway, Subnet mask, Primary DNS server, and Secondary DNS server. Additionally, you can specify the first IP address that will be assigned to the clients and the number of allocatable IP addresses. In most cases, Default Gateway and Primary DNS server should be set to the IP address of the Router's LAN interface (e.g., the default LAN IP address is 192.168.2.1), and Subnet mask is set to 255.255.255.0.

Fig. 17. DHCP Relay Settings.

When the functionality is chosen to “DHCP Relay”, the SMCWHSG44-G will not assign any IP address to the clients. It forwards the received DHCP requests from the clients to the designate DHCP server. The only setting for DHCP relay is DHCP server IP address.

1.8.5. SETUP WIZARD Step 4: Configuring IEEE 802.11 Settings

IEEE 802.11-related communication settings include Regulatory domain, Channel number, and Network name (SSID).

Fig. 18. IEEE 802.11b Communication Settings.

31

Image 32

Contents SMCWHSG44-G Page Copyright TrademarksLimited Warranty Page Industry Canada Class B Federal Communication Commission Interference StatementFCC Radiation Exposure Statement EC Conformance Declaration Safety Compliance Power Cord SafetySchuko Page Wichtige Sicherheitshinweise Germany Schuko Page Table of Contents System Page SMCWHSG44-G SMCWHS-POS Introduction Ieee 802.11b/g Compliant Wireless Operation Overview FeaturesUser Authentication, Authorization, and Accounting AAA Internet Connection Sharing Network Security Firmware Tools Rear Panel Package ChecklistLED Definition Selecting a Power Supply Method POE enabled LAN Port PositionMounting the SMCWHSG44-G on a Wall Preparing for Configuration Changing the TCP/IP Settings of the Managing ComputerConfiguring the SMCWHSG44-G Entering the PasswordSetup Wizard Selecting an Operational Mode HomePage Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable ConnectionRouter with Multiple DSL/Cable Connections Setup Wizard Configuring Dhcp Server Settings Setup Wizard Configuring Ieee 802.11 SettingsConfiguring User Authentication Settings Web RedirectionLocal Authentication Sever Authentication protocolPage How to Setup the Mini-POS Ticket Printer Account Table ListIeee Configuring Radius Settings Radius Settings Allowable Authentication ModesSetting up Client Computers Deploying the SMCWHSG44-GConfiguring TCP/IP-Related Settings Configuring Ieee 802.11-Related SettingsTo establish a wireless link to an AP Page Authentication Success Logout OverviewMenu Structure Page Status Associated Wireless Clients Save, Save & Restart, and Cancel CommandsHome and Refresh Commands Authenticated Users Account TableSession List Managed LAN DevicesSpecifying Operational Mode SystemChanging Password Managing FirmwareUpgrading Firmware by Http Backing up and Restoring Configuration Settings by HttpTo upgrade firmware of the SMCWHSG44-G by Http To upgrade firmware of the SMCWHSG44-G by Tftp Upgrading Firmware by TftpBacking up and Restoring Configuration Settings by Tftp To back up configuration of the SMCWHSG44-G by TftpTo restore configuration of the SMCWHSG44-G by Tftp Time Zone Resetting Configuration to Factory DefaultsConfiguring TCP/IP Related Settings Address Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable Connection DNS DNS Proxy Host Address Resolution NAT BasicDhcp Server To expose preset internal serversVirtual Server Mappings Dhcp Server Basic Ii. Static Dhcp MappingsTo always assign an IP address to a specific Dhcp client Dhcp RelayLoad Balancing Zero Client Reconfiguration Configuring Ieee 802.11-Related Settings Wireless BasicWireless Distribution System Wireless Distribution System Settings To enable a WDS linkSecurity Network Topology Containing a LoopPage MAC-Address-Based Access Control MAC-Address-Based Access Control SettingsIeee 802.1x/RADIUS To deny wireless clients access to the wireless networkTo grant wireless clients access to the wireless network Ieee 802.1x/RADIUS Settings Configuring Authentication Settings AAA Basic Default Authentication Failure Warning Unrestricted Clients To specify an uncontrolled computer by MAC addressWalled Garden Radius BasicRobustness Authentication Session Control Log-On Page Customization SettingsAuthentication Success Page Customization Settings Advertisement Links Settings DdnsIcmp TCP UDP To set a rule for packet filtering VlanFirewall To block Http traffic to an unwelcome Web site URL FiltersManagement Basic UPnP System LogAccess Rules SnmpUnrestricted Host MAC Address Settings LAN Device ManagementExample for LAN Device Management To specify a LAN device to manageDefault Settings Appendix aLED Definitions TCP/IP Setting Problems Page Wireless Settings Problems Other ProblemsAppendix C Distances and Data Rates Network Configuration Transmission output PowerConfiguration and Management StandardsKeypad Access Point AuthenticationBasic Service Set BSS Ad HocDynamic Host Configuration Protocol Dhcp Extended Service Set ESSExtensible Authentication Protocol EAP EncryptionInter Access Point Protocol Iapp Power over Ethernet PoEInfrastructure Local Area Network LANService Set Identifier Ssid Wireless Distribution System WDSWi-Fi Protected Access Session KeyWired Equivalent Privacy WEP WPA Pre-shared Key PSKPage For Technical SUPPORT, Call