2.Type the Starting IP address and the End IP Address of the host IP address range.
3.Select the corresponding check box next to the IP address range.
2.8.2.2. UPnP
Fig. 105. UPnP Settings.
UPnP (Universal Plug and Play) enables a Windows XP user to automatically discover peripheral devices by HTTP. When the UPnP functionality is enabled, you can see the Router in My Network Places of Windows XP. The Router can be given a name that will be shown in My Network Places. Double-clicking the icon in My Network Places will launch the default Web browser for you to configure the Router.
2.8.2.3. System Log
Fig. 106. System Log Settings.
System events can be logged to the on-board RAM of the SMCWHSG44-G (Local log) or sent in the form of SNMP trap (Remote log by SNMP trap) or BSD Syslog (Remote log by BSD Syslog) to a remote SNMP trap monitoring server or remote Syslog server, respectively. See the next subsection for more information about SNMP trap settings. Set the IP address of the Syslog server in the Syslog server IP address text box.
The system events are divided into the following categories:
•General: system and network connectivity status changes.
•Built-in AP: wireless client association and WEP authentication status changes.
•MIB II traps: Cold Start, Warm Start, Link Up, Link Down and SNMP Authentication Failure.
NOTE: The SNMP Authentication Failure trap is issued when using an incorrect community string to manage the Router via SNMP and the SNMP MIB II OID, snmpEnableAuthenTraps, is enabled (disabled by default).
81