
Fig. 24. Account Table List
1.8.6.3. How to Setup the Mini-POS Ticket Printer
The
To setup the
Fig. 25. Mini-POS Ticket Printer & Control Keypad Deployment
1.Connect the Mini-POS Ticket Printer (SMCWHS-POS) and the control keypad with the Y cable (both the control keypad and the Y cable can be found in the package of the SMCWHS-POS printer.)
2.Connect the Y cable to the COM port of the SMCWHSG44-G.
3.Open the web browser of the SMCWHSG44-G (see section 1.7).
4.Go to the section AAA\Web Redirection, in 'Functionality' of 'Basic' column, select 'Enable with Authentication'. (see section 1.8.5.2)
5.In 'Authentication protocol', select 'Local Accounts'.
6.Go to the AAA\Ticket Settings to setup the billing information.
7.Save and Restart the gateway to make the changed setting effective.
8.Power ON the printer, note that both LED light for 'POWER' and 'MODE' should be ON.
9.In step 6 above you have assigned a value to the “Amount of Money Per
35