Seagate ST100824AB, ST98823AB manual Acoustics, Electromagnetic immunity, Drive level acoustics

2.11Acoustics

Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All mea- surements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.

Note. For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equation:

(Number of seeks per second = 0.4 / (average latency + average access time)

Table 3: Drive level acoustics

Acoustic mode

Idle*	Performance Seek
2.3 bels (typ)	2.9 bels (typ)
2.6 bels (max)	3.1 bels (max)

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

2.12Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the rradio frequency (RF) environments defined in the following table:

Table 4:	Electromagnetic immunity
			Performance	Reference
Test		Description	level	standard
Electrostatic discharge		Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV	B	EN 61000-4-2: 95
Radiated RF immunity		80 to 2,000 MHz, 10 V/m,	A	EN 61000-4-3: 96
		80% AM with 1 kHz sine
		900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz		ENV 50204: 95
Electrical fast transient		± 1 kV on AC mains, ± 0.5 kV on external I/O	B	EN 61000-4-4: 95
Surge immunity		± 1 kV differential, ± 2 kV common, AC mains	B	EN 61000-4-5: 95
Conducted RF immunity		150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz	A	EN 61000-4-6: 97
		sine
Power Frequency H-field		1 A/m, 50Hz/60Hz, 3 axes	A	EN 61000-4-8: 97
immunity
Voltage dips, interrupts		30% Reduction for 25 cycles	C	EN 61000-4-11: 94
		>95% Reduction for 250 cycles	C
		>95%, 0.5 cycles	B

A - 1) No upset or degradation in performance beyond manufacturer’s specified limits.

2) No data loss.

B - 1) Unit self recovers without user intervention.

2) No data loss.

C - 1) Upset OK provided that unit will function after user intervention.

12 Momentus 5400.2 Blade Server Product Manual, Rev. B