Seagate ST100824AB Configuring and mounting the drive, Handling and static discharge precautions

Page 23

3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

•Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

•Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

•Handle the drive only by its edges or frame.

•The drive is fragile—handle it with care. Do not press down on the drive top cover.

•Always rest the drive on a padded, antistatic surface until you mount it in the computer.

•Do not touch the connector pins or the printed circuit board.

•Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

Momentus 5400.2 Blade Server Product Manual, Rev. B

17

Image 23

Contents ST9120821AB ST9100824AB ST98823AB ST96812AB ST94813AB Momentus5400.2 Blade ServerPage Contents Momentus 5400.2 Blade Server Product Manual, Rev. B List of Figures Momentus 5400.2 Blade Server Product Manual, Rev. B Momentus 5400.2 Pata disc drive IntroductionMomentus 5400.2 Blade Server Product Manual, Rev. B Specifications Drive specificationsSpecification summary Specifications Physical organization Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsTechnology Specification Time to ready Typical Max @ 25C Seek timeTime to ready Typical seek times msec Read WritePower specifications Voltage tolerance Typical current profileConducted noise Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Momentus 5400.2 Blade Server Product Manual, Rev. B Handling and static discharge precautions Configuring and mounting the driveCable-select option Jumper settingsMaster/slave configuration Drive mounting Mounting dimensions-top, side and end viewMomentus 5400.2 Blade Server Product Manual, Rev. B Cable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorCommand name Command code in hex ATA-standard commands Supported ATA commandsSupported commands ATA-standard security commands Command name Command code in hexATA-standard power-management commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandTechnical Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Presales SupportData Recovery Services Warranty ServiceData Recovery Services Authorized Service Centers Toll-free support numbers FAX services-All Europe toll callCall center Presales and Technical Support Warranty Service Asia/Pacific support services Publication feedback survey Momentus 5400.2 Blade Server Product Manual, Rev. B Numerics IndexPage TMR Momentus 5400.2 Blade Server Product Manual, Rev. B Page Seagate Technology LLC