Seagate ST98823AB, ST94813AB, ST96812AB manual Korean RRL, Australian C-Tick N176, FCC verification

Page 20

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•EUT name (model numbers): ST9120821AB. ST9100824AB, ST98823AB, ST96812AB, and ST94813AB.

•Certificate numbers:

ST9120821ABE-D011-04-3510(B)

ST9100824ABE-D011-04-3506(B)

ST98823ABE-D011-04-3503(B)

ST96812ABE-D011-04-3502(B)

ST94813ABE-D011-04-3504(B)

•Trade name or applicant: Seagate Technology International

•Manufacturing date: June 2005

•Manufacturer/nationality: Seagate Technology International

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.14.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

•Reorient the receiving antenna.

•Move the device to one side or the other of the radio or TV.

•Move the device farther away from the radio or TV.

•Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

14

Momentus 5400.2 Blade Server Product Manual, Rev. B

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Momentus5400.2 Blade Server ST9120821AB ST9100824AB ST98823AB ST96812AB ST94813ABPage Contents Momentus 5400.2 Blade Server Product Manual, Rev. B List of Figures Momentus 5400.2 Blade Server Product Manual, Rev. B Introduction Momentus 5400.2 Pata disc driveMomentus 5400.2 Blade Server Product Manual, Rev. B Specifications Drive specificationsSpecification summary Specifications Default logical geometry LBA modeFormatted capacity Physical organizationRecording and interface technology Physical characteristicsTechnology Specification Seek time Time to readyTypical seek times msec Read Write Time to ready Typical Max @ 25CPower specifications Voltage tolerance Typical current profileConducted noise Environmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Momentus 5400.2 Blade Server Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautionsCable-select option Jumper settingsMaster/slave configuration Mounting dimensions-top, side and end view Drive mountingMomentus 5400.2 Blade Server Product Manual, Rev. B ATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameCommand name Command code in hex ATA-standard commands Supported ATA commandsSupported commands ATA-standard security commands Command name Command code in hexATA-standard power-management commands Supported commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Features register valuesSeagate Technology support services Internet MySeagate Reseller.seagate.comPresales Support Technical SupportData Recovery Services Warranty ServiceData Recovery Services Authorized Service Centers Toll-free support numbers FAX services-All Europe toll callCall center Presales and Technical Support Warranty Service Asia/Pacific support services Publication feedback survey Momentus 5400.2 Blade Server Product Manual, Rev. B Index NumericsPage TMR Momentus 5400.2 Blade Server Product Manual, Rev. B Page Seagate Technology LLC
Top Page Image Contents