Seagate ST96812AB, ST98823AB manual ATA interface signals and connector pins, Connector signals

Page 27

4.0ATA interface

These drives use the industry-standard ATA task file interface that supports 16-bit data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–5. The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers.

For detailed information about the ATA interface, refer to the draft of AT Attachment with Packet Interface Extension (ATA/ATAPI-6), NCITS T13 1410D, subsequently referred to as the Draft ATA-6 Standard.

4.1ATA interface signals and connector pins

The following table summarizes the signals on the 44-pin ATA interface connector. For a detailed description of these signals, refer to the Draft ATA-6 Standard.

Table 5:	Connector signals

		Connector	Cable
Signal Name		Contact	Conductor

RESET-		1	1

DD7		3	3

DD6		5	5

DD5		7	7

DD4		9	9

DD3		11	11

DD2		13	13

DD1		15	15

DD0		17	17

Ground		19	19

DMARQ		21	21

DIOW-		23	23

DIOR-		25	25

IORDY		27	27

DMACK-		29	29

INTRQ		31	31

DA1		33	33

DA0		35	35

CS1FX-		37	37

DASP-		39	39

+5 V (Logic)		41	41

Ground (Return)		43	43

Cable	Connector
Conductor	Contact	Signal Name

2	2	Ground

4	4	DD8

6	6	DD9

8	8	DD10

10	10	DD11

12	12	DD12

14	14	DD13

16	16	DD14

18	18	DD15

20	20	(keypin)

22	22	Ground

24	24	Ground

26	26	Ground

28	28	PSYNC:CSEL

30	30	Ground

32	32	IOCS16-

34	34	PDIAG-

36	36	DA2

38	38	CS3FX-

40	40	Ground

42	42	+5V (Motor)

44	44	No connection

Momentus 5400.2 Blade Server Product Manual, Rev. B

21

Image 27

Contents ST9120821AB ST9100824AB ST98823AB ST96812AB ST94813AB Momentus5400.2 Blade ServerPage Contents Momentus 5400.2 Blade Server Product Manual, Rev. B List of Figures Momentus 5400.2 Blade Server Product Manual, Rev. B Momentus 5400.2 Pata disc drive IntroductionMomentus 5400.2 Blade Server Product Manual, Rev. B Drive specifications Specification summarySpecifications Specifications Physical organization Default logical geometryLBA mode Formatted capacityPhysical characteristics Technology SpecificationRecording and interface technology Time to ready Typical Max @ 25C Seek timeTime to ready Typical seek times msec Read WritePower specifications Typical current profile Conducted noiseVoltage tolerance Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.2 Blade Server Product Manual, Rev. B Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mounting Mounting dimensions-top, side and end viewMomentus 5400.2 Blade Server Product Manual, Rev. B Cable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandTechnical Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services FAX services-All Europe toll call Call center Presales and Technical Support Warranty ServiceToll-free support numbers Asia/Pacific support services Publication feedback survey Momentus 5400.2 Blade Server Product Manual, Rev. B Numerics IndexPage TMR Momentus 5400.2 Blade Server Product Manual, Rev. B Page Seagate Technology LLC