Seagate ST31000533CS manual Description if bit is set to Bit Word

Page 33

	Word	Description	Value

		The mandatory value of the world wide name (WWN) for the drive.	Each drive will have a unique
	108–111	NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit	Each drive will have a unique
	108–111		value.
		WWN support.	value.
		WWN support.

	112–127	ATA-reserved	0000H
	128	Security status	0001H
	129–159	Seagate-reserved	xxxxH
	160–254	ATA-reserved	0000H
	255	Integrity word	xxA5H

Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported

Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.

Description (if bit is set to 1)

	Bit	Word 63

	0	Multiword DMA mode 0 is supported.

	1	Multiword DMA mode 1 is supported.

	2	Multiword DMA mode 2 is supported.

	8	Multiword DMA mode 0 is currently active.

	9	Multiword DMA mode 1 is currently active.

	10	Multiword DMA mode 2 is currently active.

	Bit	Word 84

	0	SMART error loggin is supported.

	1	SMART self-test is supported.

	2	Media serial number is supported.

	3	Media Card Pass Through Command feature set is supported.

	4	Streaming feature set is supported.

	5	GPL feature set is supported.

	6	WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported.

	7	WRITE DMA QUEUED FUA EXT command is supported.

	8	64-bit World Wide Name is supported.

	9-10	Obsolete.

	11-12	Reserved for TLC.

	13	IDLE IMMEDIATE command with IUNLOAD faeture is supported.

	14	Shall be set to 1.

	15	Shall be cleared to 0.

Pipeline HD Pro Serial ATA Product Manual, Rev. C

27

Image 33

Contents ST31000533CS Pipeline HD Pro Serial ATARevision Date Sheets affected or comments Revision historyContents Pipeline HD Pro Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 Gbyte models Will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Typical seek times msec Read WritePower specifications Active mode Power-management modesIdle mode Sleep modeEnvironmental specifications Vibration Nonoperating shock GB modelsOperating vibration Nonoperating vibrationElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityKorean RRL Australian C-Tick N176FCC verification Corrosive environment Environmental protectionPipeline HD Pro Serial ATA Product Manual, Rev. C Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions 1000 GB modelsPipeline HD Pro Serial ATA Product Manual, Rev. C Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordWord Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Page Pipeline HD Pro Serial ATA Product Manual, Rev. C Page Disc Drive, Scotts Valley, California 95066-4544, USA