Seagate ST3500414CS, ST3250312CS, ST3250412CS Revision history, Date, Sheets affected or comments

Page 2

 

 

Revision history

Revision

Date

Sheets affected or comments

Rev. A

01/07/09

Initial release.

Rev. B

04/29/09

1, 6, 17, 22, 24, 32 and 34.

Rev. C

05/19/09

fc, 1, 3, 8, 10-11, 19 and 32.

Rev. D

07/08/09

1, 5, 7, 9, 25 and 27-28.

Rev. E

10/29/09

Updated weight information in Tables 1-3 and physical specifications. Fixed Write

 

 

DMA FUA Extended command.

Minor text and formatting changes throughout.

Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100529372, Rev. E October 2009

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD.2 Series, SeaTools and SeaTDD are either trade- marks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.

When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different standard of measure- ment and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2
Contents Pipeline HD.2 Series SATA ST31000424CSST31000322CS ST3500414CSST3500312CSST3320413CSST3320310CS ST3250412CSST3250312CS ST3160316CS Product ManualDate Revision historyRevision Sheets affected or commentsPipeline HD.2 Series SATA Product Manual, Rev. E Pipeline HD.2 Series SATA Product Manual, Rev. E 3.0 Configuring and mounting the drive Contents2.0 Drive specifications 5.0 Seagate Technology support servicesPipeline HD.2 Series SATA Product Manual, Rev. E List of Figures Page 1.0 Introduction 1.1 About the Serial ATA interface 2.0 Drive specifications 2.1 Specification summary tablesST31000424CS Drive specifications summary for 1000GB modelsDrive specification ST31000322CSpage support.seagate.com/customer/warrantyvalidation.jsp Operational Shock maxST3500312CS Drive specifications summary for 500 and 320GB modelsST3500414CS ST3320413CSST3500414CS ST3250312CS Drive specifications summary for 250 and 160GB modelsST3250412CS ST3160316CSST3250312CS 2.4 Recording and interface technology 2.3 Default logical geometry2.2 Formatted capacity 2.2.1 LBA mode2.7 Start/stop times Physical characteristics2.6 Seek time 101.85mm / 4.010 inSpinup power 2.8 Power specifications2.8.1 Power consumption Idle mode power2.8.3 Voltage tolerance 2.8.1.1 Typical current profiles2.8.2 Conducted noise Figure 1. Typical 12V startup and operation current profileActive mode 2.8.4 Power management modesIdle and Standby timers Idle mode2.9.2 Temperature gradient 2.9 Environmental specifications2.9.1 Drive case temperature 2.9.3 Humidity 2.9.3.1 Relative humidity2.9.5.2 Non-operating shock 2.9.5 Shock2.9.5.1 Operating shock 2.9.6 Vibration2.11 Electromagnetic immunity Drive A-weighted Sound Power Levels SWL, BA2.10 Acoustics emissions Test for Prominent Discrete Tones PDTs2.13 Agency certification 2.13.1 Safety certification2.12 Reliability 2.12.1 Annualized Failure Rate AFR2.13.3 FCC verification Korean RRLAustralian C-Tick N176 “O”表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。 2.14 Environmental protection2.15 Corrosive environment “X”表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。3.0 Configuring and mounting the drive 3.1 Handling and static-discharge precautionsFigure 2. Attaching SATA cabling 3.2 Configuring the drive3.3 Serial ATA cables and connectors 3.4 Drive mounting Figure 3. Mounting dimensions for 1000GB modelsFigure 4. Mounting dimensions for 500, 320, 250 and 160GB models Recommended case temperature measurement location4.0 Serial ATA SATA interface 4.1 Hot-Plug compatibility4.2 Serial ATA device plug connector pin definitions Serial ATA connector pin definitions4.3 Supported ATA commands Table 8 Supported ATA commandsPipeline HD.2 Series SATA Product Manual, Rev. E 4.3.1 Identify Device command Firmware revision 8 ASCII character string, padded with blanks to endxx07H xx3FHTotal number of user-addressable LBA sectors available Refer to Sec IDLE IMMEDIATE command with IUNLOAD faeture is supported Set PIO mode to default and disable IORDY PIO mode 4.3.2 Set Features commandTable 9 Set Features command values Code in features register 4.3.3 S.M.A.R.T. commandsTable 10 S.M.A.R.T. commands S.M.A.R.T. commandWarranty Support 5.0 Seagate Technology support servicesOnline services Global Customer SupportEurope, the Middle East and Africa Support Services Customer Service OperationsUSA/Canada/Latin America support services Asia/Pacific Support ServicesIndex Page Page Pipeline HD.2 Series SATA Product Manual, Rev. E Page Seagate Technology LLC
Related manuals
Manual 48 pages 6.03 Kb