Seagate ST3250312CS Shock, Operating shock, Non-operating shock, Vibration, Operating vibration

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

The drives comply with the performance levels specified in this document when subjected to a maximum oper- ating shock of 70 Gs (Read) and 30 Gs (Write) based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

2.9.5.2Non-operating shock

The non-operating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

2.9.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.9.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below

5Hz to 350 Hz	0.50 Gs
350Hz to 500 Hz	0.25 Gs

2.9.6.2Non-operating vibration

The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5Hz to 350Hz	5.0 Gs
350Hz to 500Hz	1.0 Gs

16 Pipeline HD.2 Series SATA Product Manual, Rev. E