Seagate Lyrion Series manual Power-management modes, Active mode, Standby/Sleep mode

Page 16

2.7.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. The drive features the following power-management modes:

Table 3:

Power-management modes

 

 

 

 

 

 

 

Power modes

Heads

 

Spindle

Buffer

 

 

 

 

 

Active (read/write/seek)

Tracking

 

Rotating

Enabled

 

 

 

 

 

Idle, performance

Tracking

 

Rotating

Enabled

 

 

 

 

 

Idle, low power

Parked

 

Rotating

Disabled

 

 

 

 

 

Standby/Sleep

Parked

 

Stopped

Disabled

 

 

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

•Performance idle mode

The drive enters this mode once the read/write/seek activity is completed. The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Low power idle mode

Drive enters Low Power Idle mode from Performance Idle mode when the Advanced Power Management Level is set between 80h and FDh, and the Idle timer reaches 2 seconds (default setting). Disc is spinning and heads are parked and drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby/Sleep mode

The drive enters Standby mode when the host sends a Standby Immediate command. When the Advanced Power Management Level is set lower than 80h (default setting), the drive enters the Standby state after 2 seconds of interface inactivity. If the host has set the standby timer, the drive may also enter the Standby mode after the expiry of the standby timer. The standby timer can be set using the Standby or Idle command. In Standby mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

10

Lyrion CE-ATA Product Manual, Rev. A

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Lyrion Series CE-ATA ST760211CA ST730212CARevision history Revision DateContents Lyrion CE-ATA Product Manual, Rev. a List of Figures Lyrion CE-ATA Product Manual, Rev. a Introduction Lyrion Series CE-ATA interface disc driveDisclaimer Drive careDrive specifications SpecificationsDrive specification ST760211CA ST730212CA OverviewSpecifications Default logical geometry LBA mode addressingFormatted capacity Model Cylinders Heads SectorsPhysical characteristics Technology SpecificationRecording and interface technology Time to readyPower specifications Power Consumption at Average W DC powerTypical current profile Conducted noise Voltage tolerance Voltage tolerance including noisePower-management modes Active modeStandby/Sleep mode Power modes Heads Spindle BufferEnvironmental specifications Shock Operating shockNonoperating shock VibrationOperating sweep sine vibration Operating random vibrationOperating random vibration profile Nonoperating sweep sine vibrationNonoperating random vibration profile Nonoperating random vibrationCorrosive environment Acoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunityMeasurement type Specification ReliabilitySafety certification Agency certificationElectromagnetic compatibility Korean RRLChina Restriction of Hazardous Substances RoHS Directive FCC verificationPage Lyrion CE-ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static discharge precautionsPage Drive installation Lyrion Series mechanical dimensions-top, side and end viewLyrion Series FPC dimensions Mounting considerationsInterface signals and connector pins Way ZIF CE-ATA interface connector signalsPin number Signal Name Definition Interface descriptionSupported command set and features MMC command setReduced ATA command set Supported commands Command Index Command Name Command DescriptionIdentify Device commands Identify Device commandWord Description Value Index Byte Address Name Description Status and Control RegistersByte Name Detailed description Address Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page Page Seagate Technology LLC

Lyrion Series specifications

The Seagate Lyrion Series is an innovative line of storage solutions designed to meet the high-performance demands of data-intensive applications. As data continues to proliferate across industries, the need for reliable, efficient, and scalable storage solutions becomes paramount. The Lyrion Series addresses this need by offering advanced technologies and characteristics that set it apart in the competitive storage market.

One of the standout features of the Lyrion Series is its impressive speed and performance. Leveraging cutting-edge Solid-State Drive (SSD) technology, these drives significantly reduce latency and enhance data access speeds compared to traditional Hard Disk Drives (HDDs). This performance boost is especially beneficial for applications that require rapid data retrieval and processing, such as virtualization, big data analytics, and real-time data processing.

Another key characteristic of the Seagate Lyrion Series is its capacity for high scalability. These drives are designed to accommodate the growing demands of modern storage environments, making them suitable for enterprises with evolving data needs. The Lyrion Series provides a range of capacities, enabling businesses to scale their storage solutions seamlessly as their data requirements expand.

Furthermore, the Lyrion Series incorporates advanced security features, ensuring that sensitive data is protected against unauthorized access. With built-in encryption options, businesses can rest assured that their information remains secure while being stored or transmitted. This is particularly crucial in industries that handle confidential data, such as finance, healthcare, and government.

The durability of the Seagate Lyrion Series also deserves attention. Designed for longevity and reliability, these drives offer robust performance in demanding conditions. They are built to withstand operational stress and provide consistent performance over time, minimizing downtime and ensuring that critical data is always accessible.

In addition to these core features, the Lyrion Series is engineered for energy efficiency. By minimizing power consumption, these drives not only reduce operational costs but also contribute to a greener IT infrastructure. This focus on sustainability aligns with the increasing global emphasis on reducing carbon footprints and promoting environmentally friendly practices.

In summary, the Seagate Lyrion Series is a versatile and powerful storage solution that combines speed, scalability, security, durability, and energy efficiency. These characteristics make it an ideal choice for businesses across various sectors looking to manage their data more effectively. As the digital landscape continues to evolve, the Lyrion Series stands as a testament to Seagate’s commitment to innovation and excellence in data storage technology.
Top Page Image Contents