Seagate Lyrion Series manual Configuring and mounting the drive

Page 27

3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

• Do not cover or seal the breather hole! Covering or sealing the breather hole may result in loss of data.

Figure 5. Lyrion Series breather hole location

Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

Before handling the drives, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

Handle the drive only by its edges or frame.

Figure 6. Lyrion Series proper handling example

The drive is fragile—handle it with care. Do not press down on the drive top cover or attempt to use a pen to write on the drive’s label.

Do not apply more than 6.8N of force to the top cover.

Always rest the drives on a padded, antistatic surface until you mount it in the system.

Lyrion CE-ATA Product Manual, Rev. A

21

Image 27
Contents ST760211CA ST730212CA Lyrion Series CE-ATARevision Date Revision historyContents Lyrion CE-ATA Product Manual, Rev. a List of Figures Lyrion CE-ATA Product Manual, Rev. a Lyrion Series CE-ATA interface disc drive IntroductionDrive care DisclaimerOverview Drive specificationsSpecifications Drive specification ST760211CA ST730212CASpecifications Model Cylinders Heads Sectors Default logical geometryLBA mode addressing Formatted capacityTime to ready Physical characteristicsTechnology Specification Recording and interface technologyPower specifications DC power Power Consumption at Average WTypical current profile Voltage tolerance Voltage tolerance including noise Conducted noisePower modes Heads Spindle Buffer Power-management modesActive mode Standby/Sleep modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockNonoperating sweep sine vibration Operating sweep sine vibrationOperating random vibration Operating random vibration profileNonoperating random vibration Nonoperating random vibration profileCorrosive environment Electromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsReliability Measurement type SpecificationKorean RRL Safety certificationAgency certification Electromagnetic compatibilityFCC verification China Restriction of Hazardous Substances RoHS DirectivePage Lyrion CE-ATA Product Manual, Rev. a Handling and static discharge precautions Configuring and mounting the drivePage Lyrion Series mechanical dimensions-top, side and end view Drive installationMounting considerations Lyrion Series FPC dimensionsInterface description Interface signals and connector pinsWay ZIF CE-ATA interface connector signals Pin number Signal Name DefinitionCommand Index Command Name Command Description Supported command set and featuresMMC command set Reduced ATA command set Supported commandsIdentify Device command Identify Device commandsWord Description Value Status and Control Registers Index Byte Address Name DescriptionByte Name Detailed description Address Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index Page Page Seagate Technology LLC

Lyrion Series specifications

The Seagate Lyrion Series is an innovative line of storage solutions designed to meet the high-performance demands of data-intensive applications. As data continues to proliferate across industries, the need for reliable, efficient, and scalable storage solutions becomes paramount. The Lyrion Series addresses this need by offering advanced technologies and characteristics that set it apart in the competitive storage market.

One of the standout features of the Lyrion Series is its impressive speed and performance. Leveraging cutting-edge Solid-State Drive (SSD) technology, these drives significantly reduce latency and enhance data access speeds compared to traditional Hard Disk Drives (HDDs). This performance boost is especially beneficial for applications that require rapid data retrieval and processing, such as virtualization, big data analytics, and real-time data processing.

Another key characteristic of the Seagate Lyrion Series is its capacity for high scalability. These drives are designed to accommodate the growing demands of modern storage environments, making them suitable for enterprises with evolving data needs. The Lyrion Series provides a range of capacities, enabling businesses to scale their storage solutions seamlessly as their data requirements expand.

Furthermore, the Lyrion Series incorporates advanced security features, ensuring that sensitive data is protected against unauthorized access. With built-in encryption options, businesses can rest assured that their information remains secure while being stored or transmitted. This is particularly crucial in industries that handle confidential data, such as finance, healthcare, and government.

The durability of the Seagate Lyrion Series also deserves attention. Designed for longevity and reliability, these drives offer robust performance in demanding conditions. They are built to withstand operational stress and provide consistent performance over time, minimizing downtime and ensuring that critical data is always accessible.

In addition to these core features, the Lyrion Series is engineered for energy efficiency. By minimizing power consumption, these drives not only reduce operational costs but also contribute to a greener IT infrastructure. This focus on sustainability aligns with the increasing global emphasis on reducing carbon footprints and promoting environmentally friendly practices.

In summary, the Seagate Lyrion Series is a versatile and powerful storage solution that combines speed, scalability, security, durability, and energy efficiency. These characteristics make it an ideal choice for businesses across various sectors looking to manage their data more effectively. As the digital landscape continues to evolve, the Lyrion Series stands as a testament to Seagate’s commitment to innovation and excellence in data storage technology.