Seagate Lyrion Series manual Environmental specifications

Page 17

2.8Environmental specifications

2.8.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambient conditions. Case temperature of the drive operating at 60°C ambient may hit a maximum of 70°C at certain parts of the casing.

Above 1,000 feet (305 meters), the maximum operating temperature is derated linearly by 1°C every 1000 feet.

Operating

0° to 60°C (32° to 140°F)

(70°C max case temperature)

 

 

 

Nonoperating

–40° to 70°C (–40° to 158°F)

 

 

 

 

2.8.2Temperature gradient

Operating

20°C per hour (36°F per hour max), without condensation

 

 

Nonoperating

30°C per hour (54°F per hour max), without condensation

 

 

2.8.3Humidity

2.8.3.1Relative humidity

Operating

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating

5% to 95% noncondensing (30% per hour max)

 

 

2.8.3.2Wet bulb temperature

Operating

33°C

(91.4°F max) [1]

 

 

 

Nonoperating

40°C

(104°F max) [2]

 

 

 

[1]Operating: Wet bulb temperature is calculated by the operating Temperature and the Relative Humidity levels.

[2]Nonoperating: Wet bulb temperature is calculated by the nonoperating Temperature and the Relative Humidity levels.

2.8.4Altitude

Operating

–60.98 m to 3,048 m (–200 ft to 10,000+ ft)

 

 

Nonoperating

–60.98 m to 12,192 m (–200 ft to 40,000+ ft)

 

 

Lyrion CE-ATA Product Manual, Rev. A

11

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ST760211CA ST730212CA Lyrion Series CE-ATARevision Date Revision historyContents Lyrion CE-ATA Product Manual, Rev. a List of Figures Lyrion CE-ATA Product Manual, Rev. a Lyrion Series CE-ATA interface disc drive IntroductionDrive care DisclaimerSpecifications Drive specificationsDrive specification ST760211CA ST730212CA OverviewSpecifications LBA mode addressing Default logical geometryFormatted capacity Model Cylinders Heads SectorsTechnology Specification Physical characteristicsRecording and interface technology Time to readyPower specifications Typical current profile DC powerPower Consumption at Average W Voltage tolerance Voltage tolerance including noise Conducted noiseActive mode Power-management modesStandby/Sleep mode Power modes Heads Spindle BufferEnvironmental specifications Operating shock ShockNonoperating shock VibrationOperating random vibration Operating sweep sine vibrationOperating random vibration profile Nonoperating sweep sine vibrationCorrosive environment Nonoperating random vibrationNonoperating random vibration profile Electromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityReliability Measurement type SpecificationAgency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification China Restriction of Hazardous Substances RoHS DirectivePage Lyrion CE-ATA Product Manual, Rev. a Handling and static discharge precautions Configuring and mounting the drivePage Lyrion Series mechanical dimensions-top, side and end view Drive installationMounting considerations Lyrion Series FPC dimensionsWay ZIF CE-ATA interface connector signals Interface signals and connector pinsPin number Signal Name Definition Interface descriptionMMC command set Supported command set and featuresReduced ATA command set Supported commands Command Index Command Name Command DescriptionWord Description Value Identify Device commandIdentify Device commands Byte Name Detailed description Address Status and Control RegistersIndex Byte Address Name Description Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page Page Seagate Technology LLC

Lyrion Series specifications

The Seagate Lyrion Series is an innovative line of storage solutions designed to meet the high-performance demands of data-intensive applications. As data continues to proliferate across industries, the need for reliable, efficient, and scalable storage solutions becomes paramount. The Lyrion Series addresses this need by offering advanced technologies and characteristics that set it apart in the competitive storage market.

One of the standout features of the Lyrion Series is its impressive speed and performance. Leveraging cutting-edge Solid-State Drive (SSD) technology, these drives significantly reduce latency and enhance data access speeds compared to traditional Hard Disk Drives (HDDs). This performance boost is especially beneficial for applications that require rapid data retrieval and processing, such as virtualization, big data analytics, and real-time data processing.

Another key characteristic of the Seagate Lyrion Series is its capacity for high scalability. These drives are designed to accommodate the growing demands of modern storage environments, making them suitable for enterprises with evolving data needs. The Lyrion Series provides a range of capacities, enabling businesses to scale their storage solutions seamlessly as their data requirements expand.

Furthermore, the Lyrion Series incorporates advanced security features, ensuring that sensitive data is protected against unauthorized access. With built-in encryption options, businesses can rest assured that their information remains secure while being stored or transmitted. This is particularly crucial in industries that handle confidential data, such as finance, healthcare, and government.

The durability of the Seagate Lyrion Series also deserves attention. Designed for longevity and reliability, these drives offer robust performance in demanding conditions. They are built to withstand operational stress and provide consistent performance over time, minimizing downtime and ensuring that critical data is always accessible.

In addition to these core features, the Lyrion Series is engineered for energy efficiency. By minimizing power consumption, these drives not only reduce operational costs but also contribute to a greener IT infrastructure. This focus on sustainability aligns with the increasing global emphasis on reducing carbon footprints and promoting environmentally friendly practices.

In summary, the Seagate Lyrion Series is a versatile and powerful storage solution that combines speed, scalability, security, durability, and energy efficiency. These characteristics make it an ideal choice for businesses across various sectors looking to manage their data more effectively. As the digital landscape continues to evolve, the Lyrion Series stands as a testament to Seagate’s commitment to innovation and excellence in data storage technology.
Top Page Image Contents