Seagate manual Mounting considerations, Lyrion Series FPC dimensions

Page 30

Figure 8. Lyrion Series FPC dimensions

3.3Mounting considerations

•Use an elastic mounting material to protect drives so as to ensure that more shock can be absorbed.

•There are guides along the side for mounting. Refer to figure on areas (refer to Figure 9, shaded area) where the mounting material can rest for mounting.

•As the drive is a sensitive device, it is not recommended to have any mounting force on the top and bottom surface of the drive other than the recommended mounting surfaces. Mounting force on non recommended surfaces shall not exceed 6.8N.”

•The drive can be operated in any orientation but horizontal or vertical orientation is preferred.

•Allow a minimum clearance of 0.012 inches (0.30 mm) around the entire perimeter of the drive for cooling, with the exception of the mounting edges for better airflow.

•In case the system design warrants bending of the FPC to the hard disc drive, care should be taken to maximize the radius.

•Mounting materials are available from many third-party vendors.

•The 18-way connector is design to meet minimum 6N Horizontal FPC retention after mating.

•The connector has a specification of 20 insertion cycles.

Figure 9. Lyrion Series Area for Protective Mounting

24

Lyrion CE-ATA Product Manual, Rev. A

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Lyrion Series CE-ATA ST760211CA ST730212CARevision history Revision DateContents Lyrion CE-ATA Product Manual, Rev. a List of Figures Lyrion CE-ATA Product Manual, Rev. a Introduction Lyrion Series CE-ATA interface disc driveDisclaimer Drive careDrive specification ST760211CA ST730212CA Drive specificationsSpecifications OverviewSpecifications Formatted capacity Default logical geometryLBA mode addressing Model Cylinders Heads SectorsRecording and interface technology Physical characteristicsTechnology Specification Time to readyPower specifications DC power Power Consumption at Average WTypical current profile Conducted noise Voltage tolerance Voltage tolerance including noiseStandby/Sleep mode Power-management modesActive mode Power modes Heads Spindle BufferEnvironmental specifications Nonoperating shock ShockOperating shock VibrationOperating random vibration profile Operating sweep sine vibrationOperating random vibration Nonoperating sweep sine vibrationNonoperating random vibration Nonoperating random vibration profileCorrosive environment Drive level acoustics AcousticsElectromagnetic immunity Electromagnetic immunityMeasurement type Specification ReliabilityElectromagnetic compatibility Safety certificationAgency certification Korean RRLChina Restriction of Hazardous Substances RoHS Directive FCC verificationPage Lyrion CE-ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static discharge precautionsPage Drive installation Lyrion Series mechanical dimensions-top, side and end viewLyrion Series FPC dimensions Mounting considerationsPin number Signal Name Definition Interface signals and connector pinsWay ZIF CE-ATA interface connector signals Interface descriptionReduced ATA command set Supported commands Supported command set and featuresMMC command set Command Index Command Name Command DescriptionIdentify Device command Identify Device commandsWord Description Value Status and Control Registers Index Byte Address Name DescriptionByte Name Detailed description Address Presales Support Seagate Technology support servicesInternet Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index Page Page Seagate Technology LLC

Lyrion Series specifications

The Seagate Lyrion Series is an innovative line of storage solutions designed to meet the high-performance demands of data-intensive applications. As data continues to proliferate across industries, the need for reliable, efficient, and scalable storage solutions becomes paramount. The Lyrion Series addresses this need by offering advanced technologies and characteristics that set it apart in the competitive storage market.

One of the standout features of the Lyrion Series is its impressive speed and performance. Leveraging cutting-edge Solid-State Drive (SSD) technology, these drives significantly reduce latency and enhance data access speeds compared to traditional Hard Disk Drives (HDDs). This performance boost is especially beneficial for applications that require rapid data retrieval and processing, such as virtualization, big data analytics, and real-time data processing.

Another key characteristic of the Seagate Lyrion Series is its capacity for high scalability. These drives are designed to accommodate the growing demands of modern storage environments, making them suitable for enterprises with evolving data needs. The Lyrion Series provides a range of capacities, enabling businesses to scale their storage solutions seamlessly as their data requirements expand.

Furthermore, the Lyrion Series incorporates advanced security features, ensuring that sensitive data is protected against unauthorized access. With built-in encryption options, businesses can rest assured that their information remains secure while being stored or transmitted. This is particularly crucial in industries that handle confidential data, such as finance, healthcare, and government.

The durability of the Seagate Lyrion Series also deserves attention. Designed for longevity and reliability, these drives offer robust performance in demanding conditions. They are built to withstand operational stress and provide consistent performance over time, minimizing downtime and ensuring that critical data is always accessible.

In addition to these core features, the Lyrion Series is engineered for energy efficiency. By minimizing power consumption, these drives not only reduce operational costs but also contribute to a greener IT infrastructure. This focus on sustainability aligns with the increasing global emphasis on reducing carbon footprints and promoting environmentally friendly practices.

In summary, the Seagate Lyrion Series is a versatile and powerful storage solution that combines speed, scalability, security, durability, and energy efficiency. These characteristics make it an ideal choice for businesses across various sectors looking to manage their data more effectively. As the digital landscape continues to evolve, the Lyrion Series stands as a testament to Seagate’s commitment to innovation and excellence in data storage technology.
Top Page Image Contents