Seagate ST9146803SS, ST9300603SS, ST9300503SS, ST9300403SS Standard features, Media description

Page 15

4.1Standard features

Savvio® 10K.3 SAS drives have the following standard features:

•1.5 / 3 / 6 Gbit Serial Attached SCSI (SAS) interface

•Integrated dual port SAS controller supporting the SCSI protocol

•Support for SAS expanders and fanout adapters

•Firmware downloadable using the SAS interface

•128 - deep task set (queue)

•Supports up to 32 initiators

•Jumperless configuration

•User-selectable logical block size (512, 520, or 528 bytes per logical block)

•Industry standard SFF 2.5-inch dimensions

•Programmable logical block reallocation scheme

•Flawed logical block reallocation at format time

•Programmable auto write and read reallocation

•Reallocation of defects on command (Post Format)

•ECC maximum burst correction length of 520 bits

•No preventive maintenance or adjustments required

•Dedicated head landing zone and automatic shipping lock

•Embedded servo design

•Self diagnostics performed when power is applied to the drive

•Zone bit recording (ZBR)

•Vertical, horizontal, or top down mounting

•Dynamic spindle brake

•16 Mbyte data buffer (see Section 5.5)

•Drive Self Test (DST)

•Background Media Scan (BMS)

•Idle Read After Write (IRAW)

•Power Save

Savvio® 10K.3 SAS Self-Encrypting Drive models have the following additional features:

•Automatic data encryption/decryption

•Controlled access

•Random number generator

•Drive locking

•16 independent data bands

•Cryptographic erase of user data for a drive that will be repurposed or scrapped

•Authenticated firmware download

4.2Media description

The media used on the drive has an aluminum substrate coated with a thin film magnetic material, overcoated with a proprietary protective layer for improved durability and environmental protection.

Savvio 10K.3 SAS Product Manual, Rev. G

7

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SED Fips 140-2 Models ST9300603SSST9300503SS ST9146803SSST9146703SSST9300403SS ST9146603SS Standard Models Self-Encrypting Drive ModelsPage Contents Interface requirements Defect and error managementInstallation About Fips About self-encrypting drivesPage Savvio 10K.3 SAS Product Manual, Rev. G List of Figures Page Seagate Online Support and Services Seagate Technology support servicesScope Electromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityKorean MIC Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-TickEuropean Union Restriction of Hazardous Substances RoHS Reference documentsGeneral description Media description Standard featuresProgrammable drive capacity PerformanceReliability Formatted capacitiesFactory-installed options Access time Performance characteristicsInternal drive characteristics Seek performance characteristicsStart/stop time General performance characteristicsPrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Unrecoverable Errors Reliability specificationsError rates Recoverable ErrorsPreventive maintenance Reliability and serviceSeek errors Interface errorsReporting control 4 S.M.A.R.TControlling S.M.A.R.T Performance impactTemperature Log Page 0Dh Parameter Code Description Predictive failuresThermal monitor Implementation State of the drive prior to testingDrive Self Test DST DST failure definitionLog page entries Short and extended testsShort test Function Code 001b Extended test Function Code 010bProduct warranty ShippingProduct repair and return information Physical/electrical specifications AC power requirementsDC power requirements Savvio 10K.3 SAS Product Manual, Rev. G Page General DC power requirement notes Power sequencingConducted noise immunity Current profiles for 300GB models Current profilesCurrent profiles for 146GB models GB models in 3 Gbit operation Power dissipation300GB models in 6 Gbit operation 146GB models in 3 Gbit operation Temperature a. Operating Environmental limits146GB models in 6 Gbit operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Shock Recommended mounting Vibration a. Operating-normalAir cleanliness Corrosive environmentAcoustics Mounting configuration dimensions Mechanical specificationsAbout Fips PurposeLevel 2 security Data encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsDefect and error management Drive internal defects/errorsDrive error recovery procedures SAS system errors Background Media Scan Media Pre-ScanDeferred Auto-Reallocation Idle Read After Write Drive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Supported commands Scsi commands supportedSupported commands Supported commands Supported commands Mode Sense data Inquiry dataSavvio inquiry data Page Mode Pages Mode Sense data for 300GB drivesMode Sense values for 146GB drives Miscellaneous operating features and conditions Miscellaneous featuresMiscellaneous status SAS physical interface Datum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out Signal characteristicsPower SAS transmitters and receiversGeneral interface characteristics SAS-2 Specification complianceLED drive signal Differential signalsSavvio 10K.3 SAS Product Manual, Rev. G Numerics IndexKCC Msid Mtbf See also cooling Page Seagate Technology LLC

ST9146803SS, ST9300603SS, ST9300503SS, ST9146603SS, ST9146703SS specifications

Seagate has long been a key player in the storage technology industry, and its enterprise-class hard drives such as the ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS stand out for their performance, reliability, and innovative features. Designed primarily for use in data centers and server environments, these drives offer a range of specifications suited for high-demand applications.

The Seagate ST9300503SS is a 300GB 2.5-inch SAS (Serial Attached SCSI) hard drive that operates at 10,000 RPM, which is essential for ensuring rapid data access. It provides a data transfer rate of 6 Gb/s and features Seagate's AgileArray technology, which enhances RAID performance and reliability by improving data integrity and optimizing power consumption. The drive is also designed to withstand the rigors of enterprise use, boasting a mean time between failures (MTBF) rating of 1.6 million hours.

In contrast, the ST9300403SS offers a similar 300GB capacity and speed, but with slight variations in features that make it better suited for specific applications. This drive also supports SAS 2.0 and includes features that enhance error recovery and data protection.

The ST9146603SS is another powerhouse, providing 146GB of storage. Operating at the same high spindle speed of 10,000 RPM, it is optimized for low-latency performance. This makes it highly suitable for transactional applications and environments where quick access to data is crucial. Like its counterparts, this drive is built with robust technologies that ensure reliable operation and enhanced data security.

The ST9146803SS bumps up the storage capacity to 300GB while maintaining the same impressive speed and performance features. Its incorporation of Seagate’s SeaTach technology allows for advanced communication protocols, which facilitate faster data transfers and lower latency.

Finally, the ST9146703SS also offers 146GB of storage and is known for its energy efficiency features that reduce operational costs in large-scale deployments. All these drives support a wide range of operating systems, making them versatile picks for businesses looking to upgrade their storage solutions.

Overall, the Seagate ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS are essential components in any enterprise environment, delivering high performance, reliability, and advanced technology features that meet the critical demands of modern data storage.
Top Page Image Contents