Seagate ST9300503SS, ST9300603SS, ST9300403SS, ST9146803SS Interface requirements, SAS features

Page 55

12.0Interface requirements

This section partially describes the interface requirements as implemented on Savvio drives. Additional infor- mation is provided in the SAS Interface Manual (part number 100293071).

12.1SAS features

This section lists the SAS-specific features supported by Savvio drives.

12.1.1task management functions

Table 5 lists the SAS task management functions supported.

Table 5:

SAS task management functions supported

 

 

 

 

Task name

 

Supported

 

 

 

 

Abort Task

 

Yes

 

 

 

 

Clear ACA

 

Yes

 

 

 

Clear task set

Yes

 

 

 

Abort task set

Yes

 

 

 

Logical Unit Reset

Yes

 

 

 

 

Query Task

 

Yes

 

 

 

 

12.1.2task management responses

Table 6 lists the SAS response codes returned for task management functions supported.

Table 6:

Task management response codes

 

 

Function name

Response code

 

 

Function complete

00

 

 

 

Invalid frame

 

02

 

 

Function not supported

04

 

 

Function failed

05

 

 

Function succeeded

08

 

 

Invalid logical unit

09

 

 

 

Savvio 10K.3 SAS Product Manual, Rev. G

47

Page 54 Page 56
Image 55
Page 54 Page 56
Contents SED Fips 140-2 Models ST9300603SSST9300503SS ST9146803SSST9146703SSST9300403SS ST9146603SS Standard Models Self-Encrypting Drive ModelsPage Contents Interface requirements Defect and error managementInstallation About Fips About self-encrypting drivesPage Savvio 10K.3 SAS Product Manual, Rev. G List of Figures Page Seagate Online Support and Services Seagate Technology support servicesScope Electromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityKorean MIC Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-TickEuropean Union Restriction of Hazardous Substances RoHS Reference documentsGeneral description Media description Standard featuresProgrammable drive capacity PerformanceReliability Formatted capacitiesFactory-installed options Access time Performance characteristicsInternal drive characteristics Seek performance characteristicsStart/stop time General performance characteristicsCache operation Prefetch/multi-segmented cache controlCaching write data Prefetch operation Unrecoverable Errors Reliability specificationsError rates Recoverable ErrorsPreventive maintenance Reliability and serviceSeek errors Interface errorsReporting control 4 S.M.A.R.TControlling S.M.A.R.T Performance impactPredictive failures Temperature Log Page 0Dh Parameter Code DescriptionThermal monitor Implementation State of the drive prior to testingDrive Self Test DST DST failure definitionLog page entries Short and extended testsShort test Function Code 001b Extended test Function Code 010bShipping Product warrantyProduct repair and return information AC power requirements Physical/electrical specificationsDC power requirements Savvio 10K.3 SAS Product Manual, Rev. G Page Power sequencing General DC power requirement notesConducted noise immunity Current profiles for 300GB models Current profilesCurrent profiles for 146GB models GB models in 3 Gbit operation Power dissipation300GB models in 6 Gbit operation 146GB models in 3 Gbit operation Environmental limits Temperature a. Operating146GB models in 6 Gbit operation Effective altitude sea level a. Operating Relative humidityShock and vibration Shock Recommended mounting Vibration a. Operating-normalCorrosive environment Air cleanlinessAcoustics Mounting configuration dimensions Mechanical specificationsPurpose About FipsLevel 2 security Data encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsDrive internal defects/errors Defect and error managementDrive error recovery procedures SAS system errors Media Pre-Scan Background Media ScanDeferred Auto-Reallocation Idle Read After Write Drive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Supported commands Scsi commands supportedSupported commands Supported commands Supported commands Inquiry data Mode Sense dataSavvio inquiry data Page Mode Pages Mode Sense data for 300GB drivesMode Sense values for 146GB drives Miscellaneous features Miscellaneous operating features and conditionsMiscellaneous status SAS physical interface Datum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out Signal characteristicsPower SAS transmitters and receiversGeneral interface characteristics SAS-2 Specification complianceLED drive signal Differential signalsSavvio 10K.3 SAS Product Manual, Rev. G Numerics IndexKCC Msid Mtbf See also cooling Page Seagate Technology LLC

ST9146803SS, ST9300603SS, ST9300503SS, ST9146603SS, ST9146703SS specifications

Seagate has long been a key player in the storage technology industry, and its enterprise-class hard drives such as the ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS stand out for their performance, reliability, and innovative features. Designed primarily for use in data centers and server environments, these drives offer a range of specifications suited for high-demand applications.

The Seagate ST9300503SS is a 300GB 2.5-inch SAS (Serial Attached SCSI) hard drive that operates at 10,000 RPM, which is essential for ensuring rapid data access. It provides a data transfer rate of 6 Gb/s and features Seagate's AgileArray technology, which enhances RAID performance and reliability by improving data integrity and optimizing power consumption. The drive is also designed to withstand the rigors of enterprise use, boasting a mean time between failures (MTBF) rating of 1.6 million hours.

In contrast, the ST9300403SS offers a similar 300GB capacity and speed, but with slight variations in features that make it better suited for specific applications. This drive also supports SAS 2.0 and includes features that enhance error recovery and data protection.

The ST9146603SS is another powerhouse, providing 146GB of storage. Operating at the same high spindle speed of 10,000 RPM, it is optimized for low-latency performance. This makes it highly suitable for transactional applications and environments where quick access to data is crucial. Like its counterparts, this drive is built with robust technologies that ensure reliable operation and enhanced data security.

The ST9146803SS bumps up the storage capacity to 300GB while maintaining the same impressive speed and performance features. Its incorporation of Seagate’s SeaTach technology allows for advanced communication protocols, which facilitate faster data transfers and lower latency.

Finally, the ST9146703SS also offers 146GB of storage and is known for its energy efficiency features that reduce operational costs in large-scale deployments. All these drives support a wide range of operating systems, making them versatile picks for businesses looking to upgrade their storage solutions.

Overall, the Seagate ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS are essential components in any enterprise environment, delivering high performance, reliability, and advanced technology features that meet the critical demands of modern data storage.
Top Page Image Contents