Seagate ST9146703SS Performance, Reliability, Formatted capacities, Programmable drive capacity

Page 16

4.3Performance

•Programmable multi-segmentable cache buffer

•600 Mbytes/sec maximum instantaneous data transfers.

•10k RPM spindle. Average latency = 3.0 msec

•Background processing of queue

•Supports start and stop commands (spindle stops spinning)

•Adaptive seek velocity; improved seek performance

Note. There is no significant performance difference between Self-Encrypting Drive and standard (non- Self-Encrypting Drive) models.

4.4Reliability

•Annualized Failure Rate (AFR) of 0.55%

•Mean time between failures (MTBF) of 1,600,000 hours

•Balanced low mass rotary voice coil actuator

•Incorporates industry-standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)

•5-year warranty

4.5Formatted capacities

Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block size before issuing a format command and obtain different formatted capacities than those listed.

To provide a stable target capacity environment and at the same time provide users with flexibility if they choose, Seagate recommends product planning in one of two modes:

Seagate designs specify capacity points at certain block sizes that Seagate guarantees current and future products will meet. We recommend customers use this capacity in their project planning, as it ensures a stable operating point with backward and forward compatibility from generation to generation. The current guaranteed operating points for this product are shown below.

Capacity (Blocks)

 

ST9300603SS

 

ST9146803SS

 

 

ST9300503SS

 

ST9146703SS

 

 

ST9300403SS

 

ST9146603SS

 

 

 

 

 

 

Sector Size

Decimal

Hex

Decimal

Hex

 

 

 

 

 

512

585937500

22ECB25C

286749488

11177330h

 

 

 

 

 

520

573653848

22314358

280790192

10BC84B0h

 

 

 

 

 

528

557874778

21407E5A

272662936

10408198h

 

 

 

 

 

4.6Programmable drive capacity

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select (6) parameter list table in the SAS Interface Manual, part number 100293071. A value of zero in the Number of Blocks field indicates that the drive will not change the capacity it is currently formatted to have. A number other than zero and less than the maximum number of LBAs in the Number of Blocks field changes the total drive capacity to the value in the Number of Blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.

8

Savvio 10K.3 SAS Product Manual, Rev. G

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ST9300603SSST9300503SS ST9146803SSST9146703SS ST9300403SS ST9146603SSStandard Models Self-Encrypting Drive Models SED Fips 140-2 ModelsPage Contents Defect and error management InstallationAbout Fips About self-encrypting drives Interface requirementsPage Savvio 10K.3 SAS Product Manual, Rev. G List of Figures Page Seagate Technology support services Seagate Online Support and ServicesScope Applicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean MICReference documents European Union Restriction of Hazardous Substances RoHSGeneral description Standard features Media descriptionPerformance ReliabilityFormatted capacities Programmable drive capacityFactory-installed options Performance characteristics Internal drive characteristicsSeek performance characteristics Access timeGeneral performance characteristics Start/stop timeCache operation Prefetch/multi-segmented cache controlCaching write data Prefetch operation Reliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Seek errorsInterface errors Preventive maintenance4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlPredictive failures Temperature Log Page 0Dh Parameter Code DescriptionThermal monitor State of the drive prior to testing Drive Self Test DSTDST failure definition ImplementationShort and extended tests Short test Function Code 001bExtended test Function Code 010b Log page entriesShipping Product warrantyProduct repair and return information AC power requirements Physical/electrical specificationsDC power requirements Savvio 10K.3 SAS Product Manual, Rev. G Page Power sequencing General DC power requirement notesConducted noise immunity Current profiles Current profiles for 300GB modelsCurrent profiles for 146GB models Power dissipation GB models in 3 Gbit operation300GB models in 6 Gbit operation 146GB models in 3 Gbit operation Environmental limits Temperature a. Operating146GB models in 6 Gbit operation Effective altitude sea level a. Operating Relative humidityShock and vibration Shock Vibration a. Operating-normal Recommended mountingCorrosive environment Air cleanlinessAcoustics Mechanical specifications Mounting configuration dimensionsPurpose About FipsLevel 2 security Controlled access Admin SPAbout self-encrypting drives Data encryptionDefault password Random number generator RNGDrive locking Data bandsAuthenticated firmware download Power requirementsSupported commands Cryptographic eraseDrive internal defects/errors Defect and error managementDrive error recovery procedures SAS system errors Media Pre-Scan Background Media ScanDeferred Auto-Reallocation Idle Read After Write Installation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Supported commandsSupported commands Supported commands Supported commands Inquiry data Mode Sense dataSavvio inquiry data Page Mode Sense data for 300GB drives Mode PagesMode Sense values for 146GB drives Miscellaneous features Miscellaneous operating features and conditionsMiscellaneous status SAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsSignal characteristics PowerSAS transmitters and receivers Ready LED OutSAS-2 Specification compliance LED drive signalDifferential signals General interface characteristicsSavvio 10K.3 SAS Product Manual, Rev. G Index NumericsKCC Msid Mtbf See also cooling Page Seagate Technology LLC

ST9146803SS, ST9300603SS, ST9300503SS, ST9146603SS, ST9146703SS specifications

Seagate has long been a key player in the storage technology industry, and its enterprise-class hard drives such as the ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS stand out for their performance, reliability, and innovative features. Designed primarily for use in data centers and server environments, these drives offer a range of specifications suited for high-demand applications.

The Seagate ST9300503SS is a 300GB 2.5-inch SAS (Serial Attached SCSI) hard drive that operates at 10,000 RPM, which is essential for ensuring rapid data access. It provides a data transfer rate of 6 Gb/s and features Seagate's AgileArray technology, which enhances RAID performance and reliability by improving data integrity and optimizing power consumption. The drive is also designed to withstand the rigors of enterprise use, boasting a mean time between failures (MTBF) rating of 1.6 million hours.

In contrast, the ST9300403SS offers a similar 300GB capacity and speed, but with slight variations in features that make it better suited for specific applications. This drive also supports SAS 2.0 and includes features that enhance error recovery and data protection.

The ST9146603SS is another powerhouse, providing 146GB of storage. Operating at the same high spindle speed of 10,000 RPM, it is optimized for low-latency performance. This makes it highly suitable for transactional applications and environments where quick access to data is crucial. Like its counterparts, this drive is built with robust technologies that ensure reliable operation and enhanced data security.

The ST9146803SS bumps up the storage capacity to 300GB while maintaining the same impressive speed and performance features. Its incorporation of Seagate’s SeaTach technology allows for advanced communication protocols, which facilitate faster data transfers and lower latency.

Finally, the ST9146703SS also offers 146GB of storage and is known for its energy efficiency features that reduce operational costs in large-scale deployments. All these drives support a wide range of operating systems, making them versatile picks for businesses looking to upgrade their storage solutions.

Overall, the Seagate ST9300503SS, ST9300403SS, ST9146603SS, ST9146803SS, and ST9146703SS are essential components in any enterprise environment, delivering high performance, reliability, and advanced technology features that meet the critical demands of modern data storage.
Top Page Image Contents