Seagate ST3160215SCE, ST3160215ACE Power-management modes, Active mode, Idle mode, Sleep mode

Page 16

2.1.7.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:

Power mode

Heads

Spindle

Buffer

 

 

 

 

Active

Tracking

Rotating

Enabled

 

 

 

 

Idle

Tracking

Rotating

Enabled

 

 

 

 

Standby

Parked

Stopped

Enabled

 

 

 

 

Sleep

Parked

Stopped

Disabled

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

•Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

•Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

•Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

10

DB35.3 Series SATA/PATA Product Manual, Rev. F

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DB35.3 Series 80-160GB ST3160215SCEST3160215ACE ST380215SCEST380215ACEPage Contents DB35.3 Series SATA/PATA Product Manual, Rev. F List of Figures DB35.3 Series SATA/PATA Product Manual, Rev. F Sata models IntroductionPata models About the Serial ATA interface Drive specifications Specification summary tableDrive specifications summary for 160 and 80 Gbyte models DB35.3 Series SATA/PATA Product Manual, Rev. F LBA mode Default logical geometryFormatted capacity Recording and interface technologyPhysical characteristics Drive specificationSeek time Start/stop timesPower specifications Power consumptionSpinup power Seek modeConducted noise Representative current profileVoltage tolerance Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Case temperature Temperature gradientWet bulb temperature Humidity Relative humidityOperating vibration Nonoperating vibrationAcoustics Fluid Dynamic Bearing FDB motor acousticsElectromagnetic immunity ReliabilityRadio frequency environments Performance Reference Test Description Level StandardAgency certification Page Corrosive environment超出 Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Handling, mounting and configuring the drive Handling and static discharge precautionsMounting the drive Breather filter hole precautions Breather filter hole locationHow to configure the drive How to configure and attach Serial ATA Sata drivesHow to connect the Sata cables How to configure and attach the Parrallel ATA Pata drives How to set the jumper settingsHow to configure the drive as a master or slave How to use the cable-select optionUltra ATA cable connectors Ultra ATA/100 cableInterface InterfaceRefer to Serial ATA connector pin definitions SignalSerial ATA Sata interface Pin Function DefinitionPage ATA interface signals and connector pins Parallel ATA Pata InterfaceSupported ATA commands Supported ATA commandsCommand name Command code in hex F9H Sata onlyIdentify Device command Word Description ValueXx07H Bit Word Description if bit is set to Bit WordBit Word 93 Pata only Set Features command 0CHS.M.A.R.T. commands Code in features Register A.R.T. commandDB35.3 Series SATA/PATA Product Manual, Rev. F Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page Sata DB35.3 Series SATA/PATA Product Manual, Rev. F Page Seagate Technology LLC

ST3160215SCE, ST380215ACE, ST380215SCE, ST3160215ACE specifications

Seagate has long been a prominent name in the world of hard drives, known for their innovative technology and reliable performance. Among their extensive product lineup, the Seagate ST3160215ACE, ST380215SCE, ST380215ACE, and ST3160215SCE hard drives stand out for their robust features and capabilities, catering to both personal and enterprise-level needs.

The Seagate ST3160215ACE offers a capacity of 160 GB, while the ST380215SCE and ST380215ACE provide 80 GB of storage. These drives are renowned for their performance, equipped with a SATA interface that ensures fast data transfer rates and efficient connectivity. With spindle speeds of 7200 RPM, these models benefit from lower latency and higher data throughput, making them suitable for a variety of applications, including gaming, media storage, and data backup.

One of the defining characteristics of the Seagate ST3160215ACE and its counterparts is their reliable data integrity features. These drives incorporate Seagate's advanced error correction technologies, including S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), which enables users to predict drive failures before they occur. This technology significantly reduces the risk of data loss, ensuring that important files remain secure.

In terms of physical design, the drives feature a compact 3.5-inch form factor, making them ideal for both desktop computers and external enclosures. The drives are built with Seagate's durable engineering, offering resilience against shock and vibration, which is essential for maintaining performance in various environmental conditions.

These models also employ a low power consumption strategy, which not only reduces energy costs but also extends the lifespan of the drive. By utilizing advanced power management technologies, the drives efficiently handle thermal conditions, ensuring stable operation even during prolonged usage.

Additionally, their compatibility with various operating systems and RAID configurations enhances their versatility in new and existing systems. Whether for a home PC or within an enterprise server setup, these Seagate models deliver performance and reliability, solidifying their place in the storage market. In summary, the Seagate ST3160215ACE, ST380215SCE, ST380215ACE, and ST3160215SCE drives offer a combination of capacity, speed, reliability, and energy efficiency, making them a compelling choice for users seeking dependable storage solutions.
Top Page Image Contents