Flextone Manual Rev E; bookfile Page 33 Tuesday, September 8, 1998 10:31 AM
THAT’S USING YOUR FEET: USING THE FLOOR BOARD WITH THE FLEXTONE
display ( 22) will show you. To switch between your Preset and User Banks bring your foot around to step on both of the Bank Select switches at the same time and you’ll be transported instantly from one region of
Channel Select
So, now that we’ve got this whole Bank thing down, let’s move onto the other four switches on the bottom row. These let you pick which of the four channels – A, B, C, or D – you want to use in the bank you’ve selected. Pick your Bank ( 21 ), hit one of the Channel Select switches ( 23), and you’re ready to roll.
Manual Mode
Hey, what about Manual Mode? Don’t worry – you can get there any time. Let’s say you’re into a User or Preset Bank, and have a particular Channel selected. The
channel’s corresponding LED is lit above its Floor Board Channel Select switch, 6 • 3 right? OK, step on this switch a second time and hold it for at least a second.
Boom! You'll find yourself transported directly to Manual Mode. To get back out of Manual Mode, use the Bank Up or Bank Down foot switches to go to a User Bank, and then you can do that “both switches at once” dance to get into the realm of the Preset Banks.
Editing and Saving Setups with the Floor Board
The basic story on editing setups is on Page 5•2 of this manual. With a Floor Board you’ll find that the display ( 22) will show an E (for “Edited”) whenever
you’ve edited a channel, as opposed to U (User) or P (Preset). It will display an S (Save) if you press the Save button on the Flextone in preparation for saving a channel. When you decide you want to save an edited channel, you can select any of the User Bank locations via the Floor Board as your destination. Here’s how:
1.EDIT A CHANNEL’S SETUP TO YOUR LIKING.
2.PRESS THE SAVE BUTTON ON THE FLEXTONE.
3.PICK THE USER BANK YOU WANT TO STORE THE SETUP IN WITH THE BANK UP AND BANK DOWN SWITCHES ON THE FLOOR BOARD.
4A. ON THE FLEXTONE, PICK THE CHANNEL MEMORY LOCATION (A, B, C, OR D) YOU WANT TO SAVE THE SETUP TO WITHIN THE SELECTED BANK, AND
5.PRESS THE SAVE BUTTON TO COMMIT THE SETUP TO THE FLEXTONE’S MEMORY. OR,
4B. SKIP 4A AND 5, AND JUST KICK YOUR CHOSEN FLOOR BOARD CHANNEL SELECT SWITCH TWICE TO SAVE THE SETUP INTO THAT CHANNEL.
