![](/images/new-backgrounds/1328898/3288985x1.webp)
Flextone Manual Rev E; bookfile Page 3 Tuesday, September 8, 1998 10:31 AM
The serial number can be found on the Flextone back panel. Please note it here for future reference:
SERIAL NO:
This equipment is UL listed (file no. E174693) for UL 6500 and
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove screws. No
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information about operating voltage and potential risks of electrical shock.
The exclamation point within a triangle means “caution!” Please read the information next to all caution signs.
Flextone User’s Manual,Version 1.1 ©1998, Fast Forward Designs, Inc., manufacturers of Line 6 brand products. Line 6, Flextone, Floor Board, FB4, and TubeTone are trademarks of Fast Forward Designs, Inc. All other product trademarks are property of their respective owners.
YOU SHOULD READ THESE IMPORTANT SAFETY INSTRUCTIONS
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
Before using your Flextone, be sure to carefully read the applicable items of these operating instructions and the safety suggestions.
1.Obey all warnings on the amp and in the Flextone Manual.
2.The heat sinks on the back of the Flextone HD can get hot! Do not touch during operation or shortly after.
2.Do not place near heat sources, such as radiators, heat registers, or appliances which produce
heat. Keep the rear of the unit at least 3 inches from walls or other items that might block heat radiation.
3.Do not block any of the ventilation openings or use in an enclosed space.
4.Guard against objects or liquids entering the enclosure.
5.Connect only to AC power outlets rated
240V range.
6.Do not step on power cords. Do not place items on top of power cords so that they are pinched or leaned on. Pay particular attention to the cord at the plug end and the point where it connects to the amp.
7.Unplug the amp when not in use for extended periods of time.
8.Do not perform service operations beyond those described in the Flextone Manual. In the followingcircumstances, repairs should be performed only by qualified service personnel:
•liquid is spilled into the unit •an object falls into the unit
•the unit does not operate normally or changes in performance in a significant way •the fuse is blown
•the unit is dropped or the enclosure is damaged
9.Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to
practice “safe listening.”