Line 6 Flextone Cab 212S user manual Rear Panel

Flextone Manual Index - Replacement for Page 14 for Rev F - Monday, September 21, 1998 12:59 PM

GRAND TOUR: REAR PANEL

is just the same as turning on the Drive Boost from the Floor Board (details in Chapter 6). As you do this, the Channel B light comes on if you turn the Drive Boost on.

2 • 4

Hold down, and keep holding down, the Tap Tempo button as you turn the Treble knob up past twelve o’clock, and you get a Presence boost, brightening your tone. Same as the EQ boost on the Floor Board (details in Chapter 6). As you do this, the Channel C light comes on if you turn the Presence “circuit” on.

REAR PANEL

FLEXTONE HD OWNERS, LISTEN UP: After reading these chapters, be sure to also spend a bit of time with Chapter 7, which covers all the important differences between the HD and the Flextone combo amps.

14Power Connector - This is where you plug the end of the power cord that doesn’t connect to the wall socket.

15Power Switch - The ultimate digital control; On or Off. Choice is everything. The HD has a front panel power switch.

16Headphone/Direct Out - If you have a Flextone HD, please see Chapter 7 for details on direct out setup. If you have a Flextone combo, plug your headphones or a 1/4” cable into this jack and it will silence the internal speakers, providing you with private listening or a direct connection to your mixing board or recorder. Plugging into this output turns on a built-in speaker cabinet simulator to emulate a miked speaker cabinet. That means no direct box is needed for recording or feeding to a live PA setup; just plug into this Direct Out for great sound right out of the box! This output is stereo on the Flextone Duo, Plus, and XL, and mono on the Flextone. Note: The Master Volume controls the output level here, too, so be sure your level isn’t cranked up too high when using the Headphone/Direct Out.