Seagate ST3400820ACE, ST3250820ACE, ST3320820ACE, ST3300820ACE manual Environmental specifications

Page 22

2.9Environmental specifications

2.9.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 75°C (167°F) within the operating ambient conditions. Rec- ommended measurement locations are shown in Figure 6 on page 25.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters).

Operating
ST3320820ACE, ST3300820ACE and ST3250820ACE	0° to 65°C (32° to 149°F)
ST3500830ACE and ST3400820ACE	0° to 62°C (32° to 143.6°F)
ST3750840ACE	0° to 60°C (32° to 140°F)

Nonoperating	–40° to 70°C (–40° to 158°F)

2.9.2Temperature gradient

Operating	20°C per hour (68°F per hour max), without condensation

Nonoperating	30°C per hour (86°F per hour max)

2.9.3Humidity

2.9.3.1Relative humidity

Operating	5% to 90% noncondensing (30% per hour max)

Nonoperating	5% to 95% noncondensing (30% per hour max)

2.9.3.2Wet bulb temperature

Operating	37.7°C (99.9°F max)

Nonoperating	37.7°C (99.9°F max)

2.9.4Altitude

Operating	–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

Nonoperating	–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

14	DB35.3 Series PATA Product Manual, Rev. C

Image 22

Contents DB35.3 Series Pata Page DB35.3 Series Pata Page Contents DB35.3 Series Pata Product Manual, Rev. C List of Figures DB35.3 Series Pata Product Manual, Rev. C Introduction DB35.3 Series Pata Product Manual, Rev. C Drive specifications Specification summary tableDrive specification ST3750840ACE ST3500830ACE ST3400820ACE DB35.3 Series Pata Product Manual, Rev. C Drive specification ST3320820ACE ST3300820ACE ST3250820ACE DB35.3 Series Pata Product Manual, Rev. C Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Physical characteristicsDrive specification 750GB 500GB 400GB 320GB 300GB 250GBSeek time Power specificationsStart/stop times Standby mode DC power requirementsTypical current profile Conducted noiseIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating shock Disc models ShockOperating shock 4 Disc modelsFluid Dynamic Bearing FDB motor acoustics AcousticsIdle CE seek profile Reliability Safety certificationElectromagnetic immunity Agency certificationAustralian C-Tick N176 Electromagnetic compatibilityKorean RRL FCC verificationCorrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS DB35.3 Series Pata Product Manual, Rev. C Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view DB35.3 Series Pata Product Manual, Rev. C ATA interface signals and connector pins Pins and supported ATA signalsSupported ATA commands Command name Command code in hexF4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command 0CH4 S.M.A.R.T. commands Code in features Register A.R.T. commandPresales Support Warranty ServiceInternet MySeagate Spp.seagate.com Technical SupportData Recovery Services Authorized Service Centers Data Recovery ServicesCall center Presales and Technical Support Warranty Service FAX services-All Europe toll callToll-free support numbers Asia/Pacific support services Index Page Page DB35.3 Series Pata Product Manual, Rev. C Page Seagate Technology LLC

Related manuals

Manual 48 pages 58.3 Kb