Seagate ST3600057FC manual Reliability specifications, Error rates, Recoverable Errors

Page 19

5.0Reliability specifications

The following reliability specifications assume correct host and drive operational interface, including all inter- face timings, power supply voltages, environmental requirements and drive mounting constraints.

Seek error rate: Read Error Rates

Recovered Data

Unrecovered Data

Miscorrected Data Interface error rate:

Annualized Failure Rate (AFR): Preventive maintenance:

Less than 10 errors in 108 seeks

Less than 10 errors in 1012 bits transferred (OEM default settings) Less than 1 sector in 1016 bits transferred

Less than 1 sector in 1021 bits transferred

Less than 1 error in 1012 bits transferred with minimum receive eye. Less than 1 error in 1014 bits transferred with typical receive eye. See Section 10.6.4, "FC Differential input." on page 71

0.55%

None required

5.1Error rates

The error rates stated in this manual assume the following:

•The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC power requirements."

•Errors caused by host system failures are excluded from error rate computations.

•Assume random data.

•Default OEM error recovery settings are applied. This includes AWRE, ARRE, full read retries, full write retries and full retry time.

•Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.

5.1.1Recoverable Errors

Recovereable errors are those detected and corrected by the drive, and do not require user intervention.

Recoverable Data errors use retries and correction. Application of ECC on-the-fly correction alone is not con- sidered a Recovered Data error.

Recovered Data error rate is determined using read bits transferred for recoverable errors occurring during a read, and using write bits transferred for recoverable errors occurring during a write.

5.1.2Unrecoverable Errors

Unrecoverable Data Errors (Sense Key = 03h) are specified at less than 1 sector in error per 1016 bits trans- ferred. Unrecoverable Data Errors resulting from the same cause are treated as 1 error for that block.

Cheetah 15K.7 FC Product Manual, Rev. A

13

Image 19

Contents Standard models Self-Encrypting Drive models Cheetah 15K.7 FCPage Contents Interface requirements Defect and error managementInstallation About self-encrypting drivesSeagate Technology support services Cheetah 15K.7 FC Product Manual, Rev. a Model Number Capacity Self-Encrypting Drive SED ScopeElectromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityEuropean Union Restriction of Hazardous Substances RoHS Ncits TR-20 Reference documentsGeneral description Standard features Formatted capacities Media descriptionPerformance ReliabilityUser-installed accessories Factory-installed optionsProgrammable drive capacity Access time Performance characteristicsInternal drive characteristics Seek performance characteristicsStart/stop time General performance characteristicsPrefetch/multi-segmented cache control Caching write data Cache operationPrefetch operation Unrecoverable Errors Reliability specificationsError rates Recoverable ErrorsPreventive maintenance Reliability and serviceSeek errors Interface errorsMilliseconds 4 S.M.A.R.TControlling S.M.A.R.T Performance impactThermal monitor Temperature Log Page 0DhDetermining rate Predictive failuresImplementation State of the drive prior to testingDrive Self Test DST DST failure definitionLog page entries Short and extended testsShort test Function Code 001b Extended test Function Code 010bShipping Product warrantyProduct repair and return information AC power requirements Physical/electrical specificationsDC power requirements ST3450857FC DC power requirements Gbit Amps ST3600057FC DC power requirements Gbit AmpsST3300657FC DC power requirements Gbit Amps General DC power requirement notesConducted noise immunity Power sequencingCurrent profiles Typical ST3450857FC current profiles Typical ST3300657FC current profiles 600GB model Power dissipation450GB models Environmental limits Temperature a. Operating300GB models Effective altitude sea level a. Operating Relative humidityShock and vibration Package size Packaged/product weight Drop heightShock Recommended mounting Corrosive environment Air cleanlinessVibration a. Operating-normal AcousticsElectromagnetic susceptibility See Section RoHS compliance statementMounting configuration dimensions Mechanical specificationsData encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsDrive internal defects/errors Defect and error managementDrive error recovery procedures Page These values are subject to change FC-AL system errorsMedia Pre-Scan Background Media ScanDeferred Auto-Reallocation Idle Read After Write Drive ID/option selection InstallationDrive orientation Air flow CoolingGrounding Drive mountingInterface requirements FC-AL featuresFibre Channel link service frames Link services supported Type of frameFibre Channel task management responses Fibre Channel task management functionsFC Scsi FCP response codes Function name Response code NPort login Plogi payload Bytes Fibre Channel port loginNPort Login Accept ACC payload Bytes Fibre Channel port login acceptProcess Login Plri payload Fabric Login Flogi payload Bytes Fibre Channel Process Login AcceptFibre Channel fabric login Process Login Accept ACC payload BytesFabric Login Accept ACC payload Bytes Fibre Channel fabric accept loginFC-AL options supported Scsi commands supportedDual port support Fibre Channel Arbitrated Loop optionsSupported commands Cheetah 15K.7 FC Product Manual, Rev. a Cheetah 15K.7 FC Product Manual, Rev. a Background Medium Scan 15h Inquiry data Mode Sense dataCheetah 15K.7 FC inquiry data Bytes Data hex Page Mode Data Header Block Descriptor Ec b2 5c 00 00 02 Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features Supported Feature or conditionFC-AL physical interface Physical characteristicsPhysical description Electrical description Connector requirementsPin descriptions Pin Signal name Signal type FC-SCA pin descriptions Pin Signal name Signal typeFC-AL transmitters and receivers Fault LED Out PowerActive LED Out Enable port bypass signalsMotor start controls 10.5.11 SEL6 through SEL0 ID lines Parallel Enclosure Services Interface ESIArbitrated loop physical address Alpa values SettingHex Dec TTL input characteristics provides the TTL characteristics Signal characteristicsDevice control codes FC Differential output LED driver signalsFC Differential input Receive eye diagram Eye diagram data values Link rate GHz Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexDevctrlcode FCP Mtbf Page See also cooling Page Cheetah 15K.7 FC Product Manual, Rev. a Page Seagate Technology LLC

Related manuals

Manual 90 pages 41.74 Kb