Dials the specified phone number | Western Telematic Data/FaxModem

Command	Function/Options
Dn	Dials the specified phone number.
	Can also include the following command options:
	L	Re-dials last number dialed
	* P	Pulse (Rotary) Dial Mode
	R	Originates call using answer (reverse)
		frequencies.
	Sn	Dials phone number string stored in NVRAM
		at position n (n = 0-3). Phone numbers are
		stored with the &Zn=s command.
	T	Tone Dial Mode
	,	(Comma) Two Second Pause. Comma
		pause duration can be redefined via the
		S8 Register.
	;	(Semicolon) Return to Command mode
		after dialing
	“	Dials the letters that follow (in an
		alphabetic phone number)
	!	(Exclamation point) Flashes the
		switch hook
	/	Delays for 125 msec before proceeding
		with dial string
	W	Wait for second dial tone (X3 or higher).
		Linked to S6 register
	@	Dials, waits for 5 seconds of silence
		after detecting ringbacks, and then
		continues (X2 or X4).
	$	Displays a list of dial commands.
En	Sets local echo. See DIP Switch 4 (Section 4.2).
	E0	Echo OFF
	* E1	Modem displays keyboard commands
Fn	Sets online local echo of transmitted data ON/OFF.
	F0	Local echo ON. Modem sends a copy of
		data it sends to the remote system to
		your screen.
	* F1	Local echo OFF. Receiving system may
		send a remote echo of data it receives.
Hn	Controls ON/OFF hook.
	H0	Hangs up (goes on hook)
	H1	Goes off hook

Page 8

Dials the specified phone number.