Command Summary
Command | Function/Options | |
In | Displays the following information. | |
| I0 | |
| I1 | Results of ROM checksum |
| I2 | Results of RAM checksum |
| I3 | Product type |
| I4 | Current modem settings |
| I5 | Nonvolatile memory (NVRAM) settings |
| I6 | Link diagnostics |
| I7 | Product configuration |
Mn | Operates speaker. | |
| M0 | Speaker always OFF |
| * M1 | Speaker ON until CONNECT |
| M2 | Speaker always ON |
| M3 | Speaker ON after dial, until CONNECT |
On | Returns online. | |
| O0 | Returns online |
| O1 | Returns online and retrains |
P | Sets pulse dial (for phone lines that don’t support | |
| ||
Qn | Displays/suppresses result codes. See DIP Switch 3 | |
| (Section 4.2). | |
| * Q0 | Displays result codes |
| Q1 | Quiet mode; no result codes |
| Q2 | Displays result codes only in Originate |
|
| mode. Cannot be stored in NVRAM. |
Sr.b=n | Sets bit .b of register r to value n (0/OFF or 1/ON). | |
Sr=n | Sets register r to value n. See list of | |
| settings (Section 6). | |
Sr? | Displays contents of | |
S$ | Displays a list of the | |
T | Sets tone dial. | |
Vn | Displays verbal/numeric result codes. See DIP | |
| Switch 2 (Section 4.2). | |
| V0 | Numeric codes |
| * VI | Verbal codes |
Page 9